La presente investigación se enfoca en el diseño y construcción utilizando elementos de bajo costo de un módulo para la adquisición de datos que miden la calidad del aire y como estación meteorológica en la zona del puerto industrial de Altamira, el módulo fue construido utilizando un mástil de tubo de acero al carbón 1-¼” cédula 30 de 2 metros, los elementos de monitoreo se resguardaron en un contenedor metálico para proteger del medio ambiente, durante el monitoreo de lograron obtener mediciones de humedad, temperatura, presión atmosférica, altitud, concentración de partículas en el aire, bióxido de carbono (CO2), como controlador se utilizó un Arduino Uno.
In electrical systems, it is important to comply with regulations that guarantee the safety and proper functioning of the installation; to validate that this is complied with, it is necessary to have certifications that are carried out by inspectors who make a visual review of the electrical installations. This article presents a multi-agent artificial intelligence system based on multimodal Generation Augmented by Recovery (RAG) that verifies compliance with electrical standards. The system is made up of agents specialized in visual perception, automatic retrieval of the applicable standards and the drafting of a technical opinion; this is done based on image processing contrasted with the NOM and NEC standards mainly in conjunction with some complementary standards such as NMX. The validity of the functionality of the system was tested in real environments where 103 inspections were carried out, achieving a reduction in the time used for inspections, which dropped from the usual 18.4 h to only 7.3 min, the time required for the inspection using the system, which represents an improvement of 99.3% in time efficiency. On the other hand, consistency among inspectors (kappa Cohen) increased from 0.68 to 0.94, thus demonstrating that there is a high standardization in opinions. These results show that the integration of large-scale language models (LLMs) and multi-agent architectures not only improved the productivity of inspection processes but also gives greater certainty to a good assessment of the physical conditions in electrical installations.