Piotr Grześ

Dr. Piotr Grześ

orcid

Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 April 2011 in Numerical Heat Transfer, Part A: Applications
Verified
Journal Article
Closed access
Aleksander YevtushenkoAleksander Yevtushenko
Aleksander Yevtushenko
PGPiotr Grześ
Piotr Grześ
The heat partition ratio is an important input parameter in simulation carried out by the finite element method (FEM) of the transient temperature fields in such elements as brakes, a pad, and a disc. Therefore, the aim of this article is to study the influence of nine various (experimental and theoretical) formulas for heat partition ratio on temperature in a pad/disc tribosystem. The real dimensions, operating conditions, and thermophysical properties of materials of two different disc brake systems were adopted for the finite element analysis. The evolutions of the temperature on the contact surface of the pad, obtained for different heat partition ratios, are compared with corresponding experimental data. The results revealed a significant influence of heat partition ratio on the evolution of pad maximal temperature, whereas the disc contact temperature was reasonably stable and coincided with most cases under consideration.

7 July 2023 in Wear
Verified
Journal Article
Open access
PGPiotr Grześ
Piotr Grześ
MKMichal Kuciej
Michal Kuciej

26 March 2019 in Advances in Mechanical Engineering
Verified
Journal Article
Open access
PDF file
PGPiotr Grześ
Piotr Grześ
A computational finite element model of a brake disc for determining transient axisymmetric (two-dimensional) temperature field during repeated brake application has been proposed. The presented research is a subsequent stage of a previous study on the coupling of velocity and maximum temperature for a single braking in accordance with the system of equations of heat dynamics of friction and wear. In the analysed case, changes in the mean, flash, maximum and bulk temperature of the disc were determined and discussed. The calculations were carried out at the temperature-dependent coefficient of friction, the thermophysical properties of cast-iron disc combined with cermet brake pads and the time-varying contact pressure. The obtained results were compared with the reference values from the braking simulation at constant operating parameters and independent of temperature properties of materials. It was shown that the maximum values of the mean temperature for both cases differed slightly during the entire process. The flash temperature determined from the heat dynamics of friction and wear system of equations was the highest at the beginning and gradually decreased with the number of brake applications.

16 December 2021 in Materials
Verified
Journal Article
Open access
PDF file
Aleksander YevtushenkoAleksander Yevtushenko
Aleksander Yevtushenko
Michal KuciejMichal Kuciej
Michal Kuciej
PGPiotr Grześ
Piotr Grześ
PWPiotr Wasilewski
Piotr Wasilewski
A new approach to numerical simulation using the finite element method (FEM) for the rotational motion of discs for railway vehicle disc brake systems was proposed. For this purpose, spatial models of transient heating due to the friction of such systems with solid and ventilated discs were developed. The performed calculations and the results obtained allowed justification of the possibility of simplifying the shape of the ventilated brake disc through elimination of ventilation channels. This contributes to a significant reduction in computational time, without compromising the accuracy of the results. The spatial and temporal temperature distributions in the ventilated and the solid disc of the same mass were analyzed. The share of energy dissipated due to convection and thermal radiation to the environment in relation to the total work done during a single braking was investigated. The maximum temperature values found as a result of computer simulations were consistent with the corresponding experimental results.

16 April 2020 in Materials
Verified
Journal Article
Open access
PDF file
Aleksander YevtushenkoAleksander Yevtushenko
Aleksander Yevtushenko
PGPiotr Grześ
Piotr Grześ
AAAdam Adamowicz
Adam Adamowicz
In this paper, a methodology for conducting a computer simulation of the frictional heating process of a multi-disc braking system is proposed. The single braking of a system of three identical discs made of carbon–carbon (C/C) carbon frictional composite material (CFCM) is considered. In order to determine the operational characteristics of the brake, a heat dynamics of friction (HDF) system of equations is formulated, which takes into account the contact pressure rise time, thermal sensitivity of the C/C material, the change in the coefficient of friction during braking, the parameters of the friction surface’s microgeometry and the mutual influence of sliding velocity and temperature. A numerical solution using the finite element method (FEM) of the HDF system of equations allows us to determine changes in key braking process characteristics, such as work done, braking torque, friction coefficient, heat transfer coefficient, velocity and temperature. Finally, a comparative analysis of the results obtained for three different time profiles of the coefficient of friction is carried out.

29 October 2020 in Materials
Verified
Journal Article
Open access
PDF file
Michal KuciejMichal Kuciej
Michal Kuciej
PGPiotr Grześ
Piotr Grześ
PWPiotr Wasilewski
Piotr Wasilewski
The article proposes two 3D and 2D numerical FE models of frictional heating for the estimation of temperature distributions in railway tread brake in 1xBg configuration during repeated long-term braking. The results of computations were compared with the time courses of temperature measured using thermocouples throughout the duration of the tests on a full-scale dynamometer for two different brake shoe materials in combination with a steel wheel. The resulting temperature distributions calculated using the proposed models agreed well with the experimental measurements, and the maximum difference in temperature values does not exceed 20%. It has been proven that 2D FE model can be as efficient as 3D model to estimate the temperature distribution during long-term and variable braking in the considered friction node. The differences in the calculation of the temperature values using these models did not exceed 3%, and the calculation time for the 2D model, compared to the 3D model, was shorter approximately 85 times for the braking cycle lasting 5032 s, and approximately 45 times for the braking cycle lasting 3297 s.