This paper provides a new goal-oriented (GO) method for reliability analysis of repairable systems with multiple fault modes. First, formulas of operators describing components with multiple fault modes are derived based on Markov process theory. Second, qualitative reliability analysis of such a system is conducted by combining the existing GO method with the Fussell–Vesely method. Third, this new method is applied in reliability analysis of a hydraulic transmission oil supply system. Finally, comparing the study results with fault tree analysis (FTA) and Monte Carlo simulation shows that this new GO method is suitable for reliability analysis of repairable systems with multiple fault modes.

This paper proposes a new goal-oriented (GO) method for reliability analysis of repairable systems with multiple-input and multi-function component (MIMFC). First, a new GO operator combination, which is composed of a new function GO operator and a new auxiliary GO operator, is created to represent MIMFC. The new function GO operator named as Type 22 operator is created to represent MIMFC itself, and the auxiliary GO operator named as Type 15B operator is created to represent multi-condition control signals of MIMFC. Then, GO operation formulas of the new GO operator combination are deduced based on logical relationships among inputs, outputs, and the component itself. The reliability analysis process of the new GO method is formulated. Furthermore, this new GO method is applied for the first time in steady availability analysis and qualitative analysis of the fan drive system of a power-shift steering transmission. Finally, the results obtained by the new GO method are compared with the results of fault tree analysis (FTA) and Monte Carlo simulation (MCS), and the comparison results show that this new GO method is reasonable and advantageous in reliability analysis of repairable systems with MIMFC. Moreover, the analysis process shows that it is more advantageous in the aspect of building system models and conducting reliability analysis. Overall, this paper not only improves the basic theory of the GO method and expands the application of the GO method, but it also provides a new approach for reliability analysis of repairable systems with MIMFC.

As one of the most important components within a vehicle, diesel engines have high requirements for reliability due to the harsh operating environments. However, previous studies have mainly focused on the reliability assessment of diesel engines, while less research has been conducted on the modeling of the diesel engine reliability analysis and its management. For this reason, this paper proposes a comprehensive method for reliability analysis and its management based on the use of 4F integration technology in the early stages of diesel engine design. First of all, an expert group used FEMCA (failure mode, effects and criticality analysis) and FHA (functional hazard analysis) to find the most harmful level of fault mode. At the same time, a new method for the repair of dynamic fault trees to find the weak links at the component level was developed. Finally, a FRACAS (fracture report analysis and corrective action system) was used during the above analysis process. By applying this method to the reliability assessment of a diesel engine in the design stage, the problems of failure information feedback and the reuse of failure information in the actual reliability assessment can be solved.