In this paper, a Direct Power Control (DPC) based on the switching table and Artificial Neural Network-based Maximum Power Point Tracking control for variable speed Wind Energy Conversion Systems (WECS) is proposed. In the context of wind energy exploitation, we are interested in this work to improve the performance of the wind generator by controlling the continuation of the Maximum Power Point Tracking (MPPT) using the Artificial Neural Network (ANN). The results obtained show the interest of such control in this system. The proposed Direct Power Control strategy produces a fast and robust power response, also the grid side is controlled by Direct Power Control based a grid voltage position to ensure a constant DC- link voltage. The THD of the current injected into the electric grid for the Wind Energy Conversion Systems with Direct Power Control is shown in this paper, the THD is lower than the 5 % limit imposed by IEEE STANDARDS ASSOCIATION. This approach Direct Power Control is validated using the Matlab/Simulink software and simulation results can prove the excellent performance of this control as improving power quality and stability of wind turbine.
6 November 2019 in European Journal of Electrical Engineering
This paper introduces a control strategy for a synchronous generator in a wind energy system using an adaptive neuro-fuzzy approach. The suggested controller, based on neuro-fuzzy logic (NFLC), is meant to govern a permanent magnet synchronous generator (PMSG) often utilized in wind power applications. The generator's output voltage phase, phase current, reactive power, active power, angular velocity, and DC voltage are all under control. The adaptive neuro-fuzzy controller efficiently stabilizes all variables in a brief amount of time, according to simulation results. The effectiveness and robust performance of the suggested control system are verified by a number of simulated scenarios. The resilience of fuzzy logic control (FLC) and NFLC systems was compared. The study carefully tested the performance of both control techniques under varied operating settings and disturbance situations to determine their relative stability, flexibility, and efficacy in sustaining desired system behavior.
This paper presents a direct power control (DPC) method for a doubly-fed induction generator (DFIG) used in variable-speed wind power systems, combining sliding mode control (SMC) with space vector modulation (SVM). The proposed SMC-based DPC with SVM (SMC-DPC_SVM) achieves decoupled power control through flux orientation, enhancing performance through the robustness of SMC and the precision of SVM. Simulation results demonstrate the effectiveness of this control strategy. The conventional direct power control (C-DPC) approach delivers fast and robust power response, and a comparative analysis between C-DPC and the proposed SMC-DPC_SVM strategy highlights the advantages of the latter. Robustness was evaluated under varying machine parameters, confirming system stability. The proposed control method was implemented and validated using MATLAB/Simulink, achieving a total harmonic distortion (THD) of less than 5%, indicating high-quality power delivery to the electrical grid.