The terahertz band is an increasingly important spectrum in a wide range of applications from bioimaging and medical diagnostics to security and wireless communications. We propose a tunable terahertz coherent radiation source based on graphene plasmon-induced transition radiation. The transition radiation in terahertz regime arises from the graphene plasmons, which are excited by a normally incident bunched electron beam. We analyze the field-intensities and spectral-angular distributions of the transition radiation with respect to Fermi energy, substrate dielectric permittivity, and electron bunch energy for both the coherent and incoherent radiation. The effect of electron bunching on the radiation pattern is discussed. The mechanism of plasmon frequency-selective transition radiation is discovered.
Transition radiation (TR) induced by electron–matter interaction usually demands vast accelerating voltages, and the radiation angle cannot be controlled. Here we present a mechanism of direction controllable inverse transition radiation (DCITR) in a graphene-dielectric stack excited by low-velocity electrons. The revealed mechanism shows that the induced hyperbolic-like spatial dispersion and the superposition of the individual bulk graphene plasmons (GPs) modes make the fields, which are supposed to be confined on the surface, radiate in the stack along a special radiation angle normal to the Poynting vector. By adjusting the chemical potential of the graphene sheets, the radiation angle can be controlled. And owing to the excitation of bulk GPs, only hundreds of volts for the accelerating voltage are required and the field intensity is dramatically enhanced compared with that of the normal TR. Furthermore, the presented mechanism can also be applied to the hyperbolic stack based on semiconductors in the infrared region as well as noble metals in the visible and ultraviolet region. Accordingly, the presented mechanism of DCITR is of great significance in particle detection, radiation emission, and so on.
The extended interaction oscillator has high power and efficiency advantages for terahertz vacuum electronic devices. The ladder line is a crucial high-frequency structure with strong coupling ability and can interact with the sheet beam to significantly improve the beam-wave interaction efficiency and is widely studied and implemented. This paper presents an optimized structure, expanding the cavities on both sides based on the original ladder line structure. The TM11 mode is effectively suppressed in the optimized structure so that the sheet beam can interact with the TM31 mode, and the cavity characteristic impedance R/Q and output power are significantly improved. Based on the theoretical derivation of the original structure and the approximated analysis of the optimized structure, the change in dispersion with structure is discussed in this paper. The field distribution in the optimized structure based on the 0.22-THz frequency band is further studied and compared with the original structure by numerical calculation and particle simulation. Furthermore, the optimal operating voltage and output window parameters are analyzed using Particle-in-Cell software, and the surface loss simulation results are given. Finally, the cavity characteristic impedance R/Q is increased by 66.7%, the bandwidth is slightly increased compared with the original structure, and the output power is increased by 163.8%. The results of the preliminary processing and cold test are presented.
In this paper, we propose a terahertz radiation source over the R-band (220–325 GHz) based on metamaterials (MTMs) structure and parallel multiple beams. The effective permittivity and permeability of the slow-wave structure can be obtained through the S-parameter retrieval approach, using numerical simulation. Additionally, the electromagnetic properties of the MTMs structure are analyzed, including the dispersion and the coupling impedance. Furthermore, we simulate the beam-wave interaction of the backward oscillator (BWO) with MTMs structure and parallel multiple beams by 3-D particle-in-cell code. It is observed that parallel multiple beams can highly enhance the beam-wave interaction and greatly enlarge the output power. These results indicate that the saturated (peak) output power is approximately 63W with the efficiency of roughly 6% at the operating frequency of 231 GHz, under the beam voltage of 35 kV and total current of 30 mA (6-beam) respectively. Meanwhile, the BWO can generate power of 10–80 W in the tunable frequency of 220–240 GHz.
In this paper, we design a frequency reconfigurable antenna for terahertz communication. The antenna is based on a Yagi design, with the main radiating elements being a pair of dipole antennas printed on the top and bottom of a dielectric substrate, respectively. The director and reflector elements give the antenna end-fire characteristics. The ends of the two arms of the dipole are constructed by staggered metal and graphene parasitic patches. By utilizing the effect of gate voltage on the conductivity of graphene, the equivalent length of the dipole antenna arms are altered and thereby adjust the antenna’s operating frequency. The proposed reconfigurable hybrid Yagi–Uda antenna can operate in five frequency bands separately at a peak gain of 4.53 dB. This reconfigurable antenna can meet the diverse requirements of the system without changing its structure and can reduce the size and cost while improving the performance.