Carbon dioxide (CO₂), a major greenhouse gas, capture has recently become a crucial technological solution to reduce atmospheric emissions from fossil fuel burning. Thereafter, many efforts have been put forwarded to reduce the burden on climate change by capturing and separating CO₂, especially from larger power plants and from the air through the utilization of different technologies (e.g., membrane, absorption, microbial, cryogenic, chemical looping, and so on). Those technologies have often suffered from high operating costs and huge energy consumption. On the right side, physical process, such as adsorption, is a cost-effective process, which has been widely used to adsorb different contaminants, including CO₂. Henceforth, this review covered the overall efficacies of CO₂ adsorption from air at 196 K to 343 K and different pressures by the carbon-based materials (CBMs). Subsequently, we also addressed the associated challenges and future opportunities for CBMs. According to this review, the efficacies of various CBMs for CO₂ adsorption have followed the order of carbon nanomaterials (i.e., graphene, graphene oxides, carbon nanotubes, and their composites) < mesoporous -microporous or hierarchical porous carbons < biochar and activated biochar < activated carbons.

In this study, magnetite nanoparticles (Fe₃O₄ NPs) were synthesized using Baccaurea ramiflora leaf extracts and characterized by visual observation, UV–Vis, FTIR, XRD, FESEM, and EDS. The UV−Vis spectrum showed continuous absorption at 300–500 nm, confirming the formation of Fe₃O₄ NPs. FTIR revealed that compounds containing the O-H group act as reducing agents during Fe₃O₄ NPs formation. Agglomerated spherical NPs were observed in the FESEM image. The prominent peak at ~6.4 keV in the EDS spectrum ascertained the existence of Fe, while the sharp peak at ~0.53 keV confirmed the presence of elemental oxygen. XRD patterns affirmed the crystalline nature. The size of as-synthesized NPs was observed to be 8.83 nm. The catalytic activity of Fe₃O₄ NPs for the reduction of methylene blue (MB) dye was monitored by UV–Vis. The maximum absorption peak of MB dye at 664 nm was almost diminished within 20 min, which revealed Fe₃O₄ NPs could be an excellent catalyst for wastewater treatment.

In recent years, polymer-supported magnetic iron oxide nanoparticles (MIO-NPs) have gained a lot of attention in biomedical and healthcare applications due to their unique magnetic properties, low toxicity, cost-effectiveness, biocompatibility, and biodegradability. In this study, waste tissue papers (WTP) and sugarcane bagasse (SCB) were utilized to prepare magnetic iron oxide (MIO)-incorporated WTP/MIO and SCB/MIO nanocomposite particles (NCPs) based on in situ co-precipitation methods, and they were characterized using advanced spectroscopic techniques. In addition, their anti-oxidant and drug-delivery properties were investigated. Field emission scanning electron microscopy (FESEM) and X-ray diffraction (XRD) analyses revealed that the shapes of the MIO-NPs, SCB/MIO-NCPs, and WTP/MIO-NCPs were agglomerated and irregularly spherical with a crystallite size of 12.38 nm, 10.85 nm, and 11.47 nm, respectively. Vibrational sample magnetometry (VSM) analysis showed that both the NPs and the NCPs were paramagnetic. The free radical scavenging assay ascertained that the WTP/MIO-NCPs, SCB/MIO-NCPs, and MIO-NPs exhibited almost negligible antioxidant activity in comparison to ascorbic acid. The swelling capacities of the SCB/MIO-NCPs and WTP/MIO-NCPs were 155.0% and 159.5%, respectively, which were much higher than the swelling efficiencies of cellulose-SCB (58.3%) and cellulose-WTP (61.6%). The order of metronidazole drug loading after 3 days was: cellulose-SCB < cellulose-WTP < MIO-NPs < SCB/MIO-NCPs < WTP/MIO-NCPs, whereas the sequence of the drug-releasing rate after 240 min was: WTP/MIO-NCPs < SCB/MIO-NCPs < MIO-NPs < cellulose-WTP < cellulose-SCB. Overall, the results of this study showed that the incorporation of MIO-NPs in the cellulose matrix increased the swelling capacity, drug-loading capacity, and drug-releasing time. Therefore, cellulose/MIO-NCPs obtained from waste materials such as SCB and WTP can be used as a potential vehicle for medical applications, especially in a metronidazole drug delivery system.

Background: Contamination of soil with heavy metals is an alarming issue around the world. Therefore, this study aimed to assess the contamination status of heavy metals in the soil of Mongla industrial area, Bangladesh. Methods: Soil samples were randomly collected from 20 sites and digested by wet digestion method. The concentrations of heavy metals (Mn, Fe, Cu, Zn, Cd, and Pb) were determined using atomic absorption spectrophotometer (AAS). The quality of soil was assessed based on the contamination factor (CF), geoaccumulation index (Igeo), enrichment factor (EF), and ecological risk index factor (ERIF) analyses. Results: The average concentrations of Mn, Fe, Cu, Zn, Cd, and Pb were obtained to be 258.08±51.61, 3736.90±322.17, 19.55±6.49, 66.76 ± 18.32, 0.59±0.13, and 10.40 ± 1.49 mg kg-1, respectively, which were below the permissible limit. The highest value of CF (0.74±0.16), Igeo (0.35±0.34), EF (24.86±6.27), and PERIF (22.11±4.81) was observed for Cd. The pollution of CF, Igeo, EF, and ERIF was classified as very severely polluted, unpolluted to moderately polluted, strongly to extremely polluted, and slightly polluted, respectively, with these heavy metals due to anthropogenic activities. One-way ANOVA indicated a significant difference between Zn and Cd concentrations (P<0.05), whereas Pearson correlation showed a positive correlation between Zn-Pb (P=0.01) and Fe-Zn (P=0.05). Conclusion: There are different classes of contamination with heavy metals in the study area. Therefore, necessary steps should be taken and people’s awareness of the soil pollution should be raised.