A simple polyvinylpyrrolidone (PVP) assisted polyol method is proposed to uniformly decorate platinum (Pt) and PtSn alloy nanoparticles onto multi-walled carbon nanotubes (MWCNTs) to form novel Pt/MWCNTs and PtSn/MWCNTs nanocomposites. The morphology, structure and composition of the nanocomposites were characterized by transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM), X-ray powder diffraction (XRD) and X-ray photoelectron spectroscopy analysis (XPS). Above characterizations reveal that Pt and PtSn alloy nanoparticles with narrow size distribution and an average diameter of around 5 nm were uniformly deposited onto MWCNTs. Furthermore, PtSn alloy other than the mixture of Pt and Sn were obtained in this process. The nanocomposites may have better performance and potential applications in fuel-cells.
At present, the most common materials for solar-blind UV light detectors are wide band-gap semiconductors, which generally have high requirements and complex methods for preparation. Ordinary semiconductor materials such as silicon, , and were industrialized, but they were excluded for direct harvest of solar-blind UV light due to their inability to absorb solar-blind light photons. Here, inorganic-organic hybrid film of was used as a spectral converter to realize the detection of broadband solar-blind UV light by ordinary semiconductor, converting broadband solar-blind UV luminescence to visible luminescence based on down-conversion process, after which the visible luminescence was detected by the Si photo-resister. The results show that hybrid film based on rare earth luminescence materials is particularly valuable for broadband solar-blind UV detection.
This paper presents two facile hydrothermal routes for the synthesis of YVO4:Eu3+ regular micron-sized spheres, in which ethylenediaminetetraacetic acid disodium (Na2EDTA) as an organic additive and polyvinyl pyrrolidone (PVP) as a nonionic organic additive were used, respectively. Their morphologies, structures, particle size distribution and photoluminescence properties of YVO4:Eu3+ phosphors were systematically investigated by field emission scanning electron microscopy (FE-SEM), X-ray powder diffraction (XRD), particle size analyzer and photoluminescence (PL) spectroscopy, respectively. The results of above characterizations showed that the obtained products were phase-pure YVO4:Eu3+ uniform spheres with a tetragonal structure and an average diameter range of 1~3 μm. Five controlled experiments were performed in the same condition except that none additive or other additives (i.e., sodium dodecyl sulfate (SDS), polyethylene glycol 6000 (PEG-6000), cetyl trimethyl ammonium bromide (CTAB) and sodium citrate) were introduced into the hydrothermal process. Not uniform micron-sized spheres but other morphologies such as nanoparticles or micron-sized cubes were obtained through these controlled experiments, which revealed that Na2EDTA or PVP was a key factor for the synthesis of the uniform micron-sized spheres. Meanwhile, under the excitation around 275 nm, these spherical Eu3+ ions doped samples showed enhanced red emission than other samples.