Aerodynamics of Wind Turbines is the established essential text for the fundamental solutions to efficient wind turbine design. Now in its third edition, it has been substantially updated with respect to structural dynamics and control. The new control chapter now includes details on how to design a classical pitch and torque regulator to control rotational speed and power, while the section on structural dynamics has been extended with a simplified mechanical system explaining the phenomena of forward and backward whirling modes. Readers will also benefit from a new chapter on Vertical Axis Wind Turbines (VAWT). Topics covered include increasing mass flow through the turbine, performance at low and high wind speeds, assessment of the extreme conditions under which the turbine will perform and the theory for calculating the lifetime of the turbine. The classical Blade Element Momentum method is also covered, as are eigenmodes and the dynamic behaviour of a turbine. The book describes the effects of the dynamics and how this can be modelled in an aeroelastic code, which is widely used in the design and verification of modern wind turbines. Furthermore, it examines how to calculate the vibration of the whole construction, as well as the time varying loads and global case studies.

Three-dimensional and rotational viscous effects on wind turbine blades are investigated by means of a quasi-3D Navier-Stokes model. The governing equations of the model are derived from the 3-D primitive variable Navier-Stokes equations written in cylindrical coordinates in the rotating frame of reference. The latter are integrated along the radial direction and certain assumptions are made for the mean values of the radial derivatives. The validity of these assumptions is cross-checked through fully 3-D Navier-Stokes calculations. The resulting quasi-3D model suggests that three-dimensional and rotational effects be strongly related to the local chord by radii ratio and the twist angle. The equations of the model are numerically integrated by means of a pressure correction algorithm. Both laminar and turbulent flow simulations are performed. The former is used for identifying the physical mechanism associated with the 3-D and rotational effects, while the latter for establishing semiempirical correction laws for the load coefficients, based on 2-D airfoil data. Comparing calculated and measured power curves of a stall controlled wind turbine, it is shown that the suggested correction laws may improve significantly the accuracy of the predictions. [S0098-2202(00)02702-4]