In this study, a 1:3 scaled, three-storey, FRP (Fiber Reinforced Polymer) retrofitted reinforced concrete model structure whose behaviour and crack development were identified experimentally in the laboratory was investigated analytically. Determination of structural behaviour under earthquake load is only possible in a laboratory environment with a specific scale, as carrying out structural experiments is difficult due to the evaluation of increased parameter numbers and because it requires an expensive laboratory setup. In an analytical study, structure was modelled using ANSYS Finite Element Package Program (2007), and its behaviour and crack development were revealed. When experimental difficulties are taken into consideration, analytical investigation of structure behaviour is more economic and much faster. At the end of the study, experimental results of structural behaviour and crack development were compared with analytical data. It was concluded that in a model structure retrofitted with FRP, the behaviour and cracking model can be determined without testing by determining the reasons for the points where analytical results are not converged with experimental data. Better understanding of structural behaviour is analytically enabled with the study.
9 August 2023 in International Journal of Steel Structures
Earthquake negatively affects the behavior of reinforced concrete frame systems that have slab discontinuities. As a result of differences in diaphragm behavior according to slab void ratio and position, lateral loads cannot be distributed to vertical bearing elements in proportion to their rigidity. In this study, the topic of differences in the behavior of reinforced concrete frame system under lateral load if void ratio and position of the slab change have been examined numerically. For this purpose, five single-story three-dimensional carrier frame models with different void ratios and positions were created in the ANSYS program analyzing according to the finite element method. As a result of the study, an increase in slab void ratio of reinforced concrete frame type carrier systems resulted in displacement in more significant amounts. Along with 25% being a safe void ratio in terms of rigid diaphragm behavior when the void ratio is 50%, whether the void is symmetrical or not becomes extremely important in terms of behavior.
9 March 2023 in International Journal of Civil Engineering