We developed the Global–Local Integrated Topology inverse design algorithm (denoted as the GLINT algorithm), which employs a trajectory-based optimization strategy with waveguide–substrate material-flipping structural modifications, enabling the direct optimization of discrete waveguide–substrate binary structures. Compared to the conventional Direct Binary Search (DBS), the GLINT algorithm not only significantly enhances computational efficiency through its global search–local refinement framework but also achieves a superior 20 nm × 20 nm optimization resolution while maintaining its optimization speed—substantially advancing the design capability. Utilizing this algorithm, we designed and experimentally demonstrated a 3.5 µm × 3.5 µm dual-port wavelength division multiplexer (WDM), achieving a minimum crosstalk of −11.3 dB and a 2 µm × 2 µm 90-degree bending waveguide exhibiting a 0.31–0.52 dB insertion loss over the 1528–1600 nm wavelength range, both fabricated on silicon-on-insulator (SOI) wafers. Additionally, a 4.5 µm × 4.5 µm three-port WDM structure was also designed and simulated, demonstrating crosstalk as low as −36.5 dB.
Leveraging our developed Global–Local Integrated Topology inverse design algorithm, we designed an efficient, compact, and symmetrical power splitter on a silicon-on-insulator platform. This device achieves a low insertion loss of 0.18 dB and a power imbalance of 80% accuracy with >0.9 probability under simulated random fabrication errors.
Thin-film lithium tantalate (LiTaO3) is a promising platform for integrated nonlinear photonics owing to its strong second-order nonlinearity, broad transparency window, and favorable photorefractive resistance. Here, we numerically investigate cascaded fourth-harmonic generation in quasi-phase-matched thin-film LiTaO3 waveguides, targeting ultraviolet generation at 387.5 nm from a 1550 nm pump. Three poling schemes, including square-wave periodic poling, generalized quasi-periodic superlattice (GQPS), and dual-period poling (DPP), are designed to simultaneously compensate the phase mismatch of second-harmonic generation and fourth-harmonic generation. Under a 10 mW average input power and 250 fs pulse duration, the simulated fourth-harmonic conversion efficiencies reach 42.7%, 35.7%, and 57.1%, respectively. The DPP structure provides the highest efficiency by supporting both nonlinear processes with relatively strong low-order reciprocal–vector components. The influence of waveguide geometry errors and temperature tuning is further analyzed, showing that the fourth-harmonic process is more temperature-sensitive than the second-harmonic process. In addition, the feasibility of extending this scheme toward 300 nm deep-ultraviolet generation is discussed. These results provide a design route for compact, efficient, and fabrication-compatible on-chip ultraviolet sources based on thin-film LiTaO3 nonlinear photonics.