We present a compact passively mode-locked fiber laser emitting near 910 nm with an all-polarization-maintaining fiber laser architecture. The ring-cavity laser configuration includes a core-pumped neodymium-doped fiber as a gain medium and a semiconductor saturable absorber mirror as a passive mode-locking element. A bandpass filter is used to suppress parasitic emission near 1.06 µm and allows wavelength tuning between 903 and 912 nm. The laser operates in a highly stable and self-starting all-normal-dispersion regime with a minimum pulse duration of 8 ps at 28.2 MHz pulse repetition rate and 0.2 nJ maximum pulse energy. A single-pass amplifier stage increases the pulse energy up to 1.5 nJ, and pulse compression with a pair of gratings is demonstrated with nearly Fourier transform limited pulses.

We report on a passively mode-locked erbium-doped fiber laser featuring a large normal dispersion and emitting high-energy dissipative solitons. Mode-locking is stabilized by the combined actions of a high nonlinearity amplitude modulator and a narrow band spectral filter. The laser routinely delivers highly chirped pulses with more than 38 nJ energy that can be compressed down to 700 fs duration using bulk gratings. Numerical simulations confirm the experimental results and reveal the self-similar pulse evolution along the normal dispersion fibers included inside the cavity.

We demonstrate for the first time, to our knowledge, an all-polarization-maintaining double-clad neodymium fiber laser operating in the dissipative soliton resonance (DSR) regime where stable mode-locking is achieved using a nonlinear amplifying loop mirror (NALM) with large normal dispersion in a figure-8 cavity design. The laser thereby generates square-shaped nanosecond pulses whose duration linearly scales with pump power from 0.5 up to 6 ns, with a maximum energy of 20 nJ. In addition, output pulses feature a remarkably narrow bandwidth of 60 pm along with a signal-to-noise ratio higher than 80 dB. This study then paves the way toward using such DSR-based sources for efficient frequency doubling in the blue spectral range.

We report on mid-infrared optical parametric generation in the 4–5 μm and 9–12 μm bands by pumping custom-designed orientation-patterned gallium arsenide (OP-GaAs) rib waveguides with an ultrafast femtosecond fiber laser system. This pump source is seeded by a mode-locked fluoride fiber laser with 59 MHz repetition rate and can be tuned between 2.8 and 3.2 μm using a soliton self-frequency shifting stage. The single TE and TM modes OP-GaAs crystals feature quasi-phase-matched grating periods of 85 and 90 μm and different transverse sizes thus allowing a wide spectral tunability.

We report a fiber optical parametric oscillator (FOPO) synchronously pumped in a C-band, delivering high-energy picosecond pulses exceeding the nanojoule level of around 1700 nm. The gain medium is a dispersion-shifted fiber, pumped by highly-chirped pulses from a mode-locked dissipative soliton fiber laser. Optimizing the pump wavelength along with time-dispersion-tuning of the FOPO enabled a broad tunability from 1617–1876 nm for the idler wave. In addition, relative intensity noise levels below −140 dBc Hz ⁻¹ have been achieved, paving the way for using such a source in biophotonics and instrumentation.

We demonstrate a fiber optical parametric chirped-pulse oscillator (FOPCPO) pumped in the normal-dispersion regime by chirped pulses at 1.036 µm. Highly chirped idler pulses tunable from 1210 nm to 1270 nm with energies higher than 250 nJ are generated from our system, along with signal pulses tunable from 870 nm to 910 nm. Numerical simulations demonstrate that further energy scaling is possible and paves the way for the use of such FOPCPOs for applications requiring high-energy, compact, and low-noise sources, such as in biophotonics or spectroscopy.