Produced water is the largest byproduct of oil and gas production, which contains various environmental contaminants such as heavy metals, salts, and organic compounds. Among all cations present in produced water, lithium and strontium are of particular environmental concern. Lithium poses potential toxicity to aquatic organisms, while strontium contributes to scale formation and facilitates the co-precipitation of naturally occurring radioactive materials. Although selecting an appropriate treatment method remains a significant challenge, chemical precipitation has demonstrated promising potential for cation removal. This study investigates the effectiveness of chemical precipitation for removing lithium and strontium from highly saline produced water obtained from an oil field in Iran. Sodium carbonate and sodium sulfate were applied at concentrations of 0.12, 0.14, and 0.16 M. Experiments were conducted at two temperatures, 25 °C and 90 °C, to assess the influence of temperature and salt concentration on precipitation efficiency. The results revealed that Na2SO4 was particularly effective in strontium removal, achieving a maximum removal efficiency of 86% at 90 °C and 0.16 M. In contrast, Na2CO3 exhibited limited efficacy in lithium removal, with a maximum removal rate of only 10%. The results imply that although both salts are promising choices to remove strontium, more optimization is needed to enhance lithium extraction, potentially employing multi-step treatments or other pretreatment techniques.
Oilfield-produced water is a major environmental concern due to elevated concentrations of dissolved metals, notably Sr, which can form insoluble scales as SrSO₄ and facilitate the co-precipitation of naturally occurring radioactive materials. In this study, for the first time, a biosurfactant extracted from Malva sylvestris leaves, rich in saponins, was explored as a green and biodegradable agent for Sr removal from highly saline produced water collected in western Iran. Batch experiments investigated the effect of temperature (25 °C and 60 °C) and biosurfactant concentration (0.006, 0.015, and 0.024 g/mL) on removal efficiency. The removal mechanism is primarily attributed to coordination between Sr ions and the deprotonated carboxylate groups in saponin molecules, forming stable Sr-saponin complexes. Elevated temperature enhances this process through increased molecular mobility, partial dehydration of Sr2⁺ hydration shells, and favorable thermodynamic shifts, as indicated by Van't Hoff analysis. Increasing biosurfactant concentration supplies more active binding sites and improves selectivity over competing cations such as Ca2⁺ and Mg2⁺. Time-dependent experiments further revealed that complexation starts after 2 days, and complete sedimentation was observed at the end of the test (day 5). The absence of further Sr reduction between days 5 and 10 indicates the long-term stability of the complexes and their resistance to re-dissolution. A peak Sr removal efficiency of 63.6% was achieved at 60 °C and 0.024 g/mL with no significant change in the pH of the aqueous phase, demonstrating the potential of M. sylvestris for stable and efficient Sr removal from real oilfield produced water. This approach provides a novel, sustainable, and cost-effective alternative to conventional synthetic chemicals for produced water treatment.
Understanding the role of crude oil properties, especially the asphaltene content of crude oil is crucial for enhancing the efficiency of smart water flooding, as it significantly impacts wettability and recovery factors. This study evaluates the predictive capabilities of a developed geochemical model for predicting wettability alteration during smart water flooding in carbonate reservoirs. Three types of oil samples with varying asphaltene content were employed: crude oil (8.5% asphaltene), deasphalted oil (1.8% asphaltene), and asphaltene-enriched toluene (98% asphaltene). Core flooding experiments were conducted using five types of brines: seawater, twice the sulfate concentration (2SO₄), four times the sulfate concentration (4SO₄), four times the calcium concentration (4Ca), and four times the magnesium concentration (4Mg). The model integrates DLVO (Derjaguin, Landau, Verwey, and Overbeek) theory and calculates zeta potential and disjoining pressure based on the crude oil/brine/rock (COBR) system properties such as ionic composition and oil properties. Recovery factor measurements and contact angle analyses confirmed the model’s accuracy, with seawater injection in asphaltene-rich oil resulting in the most negative electrical double layer (EDL) pressure (− 350 MPa) and a recovery factor of 10%. Conversely, 4Mg brine demonstrated superior performance in promoting water-wet conditions for both crude oil (21.34% recovery factor) and deasphalted oil (18.41% recovery factor). This study underscores the critical role of brine composition and crude oil properties in optimizing smart water flooding strategies and validates the geochemical model as a robust tool for tailoring brine compositions to enhance oil recovery in carbonate reservoirs.