In this article, a dual-layer sliding mode control scheme based on a nonlinear extended state observer (NESO) is designed to achieve displacement tracking of the piezoelectric stick-slip actuator (PSSA). A simple and continuous friction model (SCFM) is constructed based on the Coulomb friction model and the hyperbolic tangent function, and the electromechanical-rigid-flexible-friction coupled dynamics of the PSSA is established. By introducing a tracking differentiator (TD), the overshoot that adversely affects displacement control is effectively suppressed, while the unknown nonlinear characteristics of the PSSA are actively estimated through the NESO. The convergence speed and control accuracy of the PSSA are enhanced by the designed dual-layer sliding mode controller, and the stability of both the NESO and the controller is analyzed using the Lyapunov method and finite-time control theory. Finally, experimental results on motion control demonstrate that the proposed dual-layer sliding mode approach effectively achieves the desired positioning and trajectory tracking performance of the PSSA.
Aiming at problems such as the reduced positioning accuracy and insufficient dynamic response caused by the inherent hysteresis nonlinearity of piezoelectric actuators, this paper proposes a hysteresis modeling and compensation method for piezoelectric actuators based on nonlinear transformation. The proposed NT hysteresis model utilizes the nonlinear characteristics of activation functions to describe the complex nonlinearity in the hysteresis response of piezoelectric actuators. On this basis, a feedforward compensation controller is further designed based on the proposed inverse NT hysteresis model. Moreover, a composite controller is constructed by combining it with PID feedback to improve the dynamic response speed and trajectory tracking accuracy of piezoelectric actuators. Based on experimental data, the fitting performance of the proposed model is compared with that of several common hysteresis models using evaluation indicators including RMSE, MAPE and SMAPE. Finally, the performance of the proposed control method is verified through step response and sinusoidal trajectory tracking experiments. Experimental results show that the proposed NT hysteresis model performs best in characterizing the hysteresis characteristics of piezoelectric actuators, and the feedforward compensation controller constructed based on its inverse model exhibits superior control performance.
1 August 2026 in IEEE/ASME Transactions on Mechatronics