The current study employs numerical simulations via the SCAPS-1D platform to investigate the performance of solar cells based on perovskite, with RbGeI3 utilized as an absorber material possessing a wide bandgap of 1.31 eV. Through systematic exploration of various parameters including temperature, layer thickness, doping, and defects, the study aims to enhance the efficiency of the solar cells, considering their sensitivity to temperature variations. Results demonstrate that the proposed configuration effectively extends the absorption spectrum into the near-infrared region, with the thickness of the RbGeI3 layer emerging as a critical factor influencing device performance. Analysis reveals that the series resistance peaks at 2 Ω·см2, while the shunt resistance achieves optimal output parameters of up to 103 Ω·см2. Moreover, optimization efforts yield a solar cell exhibiting a power conversion efficiency of 24.62%, fill factor of 82.8%, open circuit voltage of 0.99V, and short circuit current density of 33.20 mA/cm2 at a RbGeI3 thickness of 0.6 um. This comprehensive numerical investigation not only enhances understanding of the intricate factors influencing perovskite solar cells but also suggests promising avenues for future advancements in the field.
30 April 2023 in Aceh International Journal of Science and Technology
The interfacial transition zone (ITZ) has a significant negative impact on the structural performance of concrete. This negative impact can be ameliorated by introducing mineral additions into the concrete. In this study, different forms (degree of circularity) of coarse aggregates and three contents (10 %, 15 % and 20 %) of mineral addition (natural pozzolan) were used to prepare ordinary concrete. This article aims to determine the optimal and effective mixture (the best form of aggregate and addition). This article aims to determine the optimal and efficient mixture (the best form of aggregate and addition) on the basis of mechanical (compressive strength), and chemical (immersion in 3.5 % H2SO4 solution) tests. Furthermore, the effect of the interaction between the aggregate and the modified cementitious matrix was analyzed and discussed using the scanning electron microscope (SEM). The results show that the effect of the addition of 20 % pozzolana improves the aggregate/matrix transition zone, which made it possible to develop a maximum compressive strength at 60 days (51 MPa). In addition, the effect of mineral additions varies depending on the shape of the coarse aggregate. Thus, an effective numerical modeling of the compressive strength is based on the approach of the full factorial design taking into account the degree of circularity of the coarse aggregates and the content of the pozzolan.
Enhancing the freeze–thaw durability of cementitious materials is a key challenge for sustainable construction, particularly in cold-climate applications. Within the broader research field of fiber-reinforced cementitious composites, this study contributes to the ongoing shift toward eco-friendly reinforcement strategies by comparatively evaluating natural plant-based fibers and conventional synthetic fibers. The influence of date palm, dis, alfa, hemp, and polypropylene fibers on the freeze–thaw resistance of metakaolin-based mortars was systematically investigated. Six mortar formulations were tested, each containing fibers at 0.1% by total volume. Compressive and flexural strengths, porosity, dynamic elastic modulus, and thermal conductivity were evaluated before and after freeze-thaw cycles. Results showed polypropylene fibers provided high initial compressive strength (~62 MPa), though significant stiffness reduction (~16%) occurred after cycling. Hemp fibers initially delivered superior flexural strength (~7.5 MPa) but exhibited substantial degradation (~32% loss) after 120 cycles. Alfa and date palm fibers presented intermediate performance with moderate mechanical deterioration, whereas dis fibers maintained relatively stable compressive strength (~45 MPa). Natural fibers generally increased porosity post-cycling but showed reduced thermal conductivity, reflecting structural damage. Overall, the study confirms that fiber incorporation significantly influences the freeze-thaw durability of mortars, with polypropylene fibers offering enhanced long-term stability compared to natural alternatives.