The application of morphing wing devices can bring several benefits in terms of aircraft performance, as the current literature shows. Within the scope of Clean Sky 2 AirGreen 2 European project, the authors provided a safety-driven design of an adaptive winglet, through the examination of potential hazards resulting from operational faults, such as actuation chain jamming or links structural fails. The main goal of this study was to verify whether the morphing winglet systems could comply with the standard civil flight safety regulations and airworthiness requirements (EASA CS25). Systems functions were firstly performed from a quality point of view at both aircraft and subsystem levels to detect potential design, crew and maintenance faults, as well as risks due to the external environment. The severity of the hazard effects was thus identified and then sorted in specific classes, representative of the maximum acceptable probability of occurrence for a single event, in association with safety design objectives. Fault trees were finally developed to assess the compliance of the system structures to the quantitative safety requirements deriving from the Fault and Hazard Analyses (FHAs). The same failure scenarios studied through FHAs have been simulated in flutter analyses performed to verify the aeroelastic effects due to the loss of the actuators or structural links at aircraft level. Obtained results were used to suggest a design solution to be implemented in the next loop of design of the morphing winglet.

Preliminary design of an adaptive aileron for next generation regional aircraft

Modern transport aircraft wings have reached near-peak levels of energy-efficiency and there is still margin for further relevant improvements. A promising strategy for improving aircraft efficiency is to change the shape of the aircraft wing in flight in order to maximize its aerodynamic performance under all operative conditions. In the present work, this has been developed in the framework of the Clean Sky 2 (REG-IADP) European research project, where the authors focused on the design of a multifunctional twistable trailing-edge for a Natural Laminar Flow (NLF) wing. A multifunctional wing trailing-edge is used to improve aircraft performance during climb and off-design cruise conditions in response to variations in speed, altitude and other flight parameters. The investigation domain of the novel full-scale device covers 5.15 m along the wing span and the 10% of the local wing chord. Concerning the wing trailing-edge, the preliminary structural and kinematic design process of the actuation system is completely addressed: three rotary brushless motors (placed in root, central and tip sections) are required to activate the inner mechanisms enabling different trailing-edge morphing modes. The structural layout of the thin-walled closed-section composite trailing-edge represents a promising concept, meeting both the conflicting requirements of load-carrying capability and shape adaptivity. Actuation system performances and aeroelastic deformations, considering both operative aerodynamic and limit load conditions, prove the potential of the proposed structural concept to be energy efficient and lightweight for real aircraft implementation. Finally, the performance assessment of the outer natural laminar flow (NLF) wing retrofitted with the multifunctional trailing-edge is performed by high-fidelity aerodynamic analyses. For such an NLF wing, this device can improve airplane aerodynamic efficiency during high speed climb conditions.