Applications de la DSC pour la caractérisation des systèmes émulsifiés-Cet article décrit comment l'analyse calorimétrique différentielle (DSC) peut être utilisée pour caractériser les émulsions, en particulier les émulsions eau-dans-huile opaques et concentrées rencontrées dans l'industrie pétrolière. Après une présentation de la technique, nous expliquerons comment il est possible, à partir d'un simple test réalisé sur un échantillon d'émulsion non dilué, d'obtenir des informations sur les propriétés de solidification et de fusion de ces systèmes complexes, notamment le type d'émulsion, la quantité d'eau, la présence de soluté, la stabilité et même la taille des gouttes. Quelques exemples d'applications sont donnés, en particulier sur les émulsions de champ rencontrées en production et sur les boues de forage à base d'huile. Abstract-Application of DSC for Emulsified System Characterization-This paper will describe how Differential Scanning Calorimetry (DSC) may be used to characterize emulsions, especially the concentrated and opaque water-in-oil emulsions encountered in the oil industry. After a presentation of the technique, we will point out how it is possible, from a single test performed on an emulsion sample without dilution, to get information about the solidification and melting properties of these complex fluids, the emulsion type, the amount of water, the presence of solute, the stability and even the droplet size. Some examples of applications are given concerning oilfield emulsions and oil-based mud systems.

The framework of this work was to develop an emulsion-based edible film based on a chitosan nanoparticle matrix with cellulose nanocrystals (CNCs) as a stabilizer and reinforcement filler. The chitosan nanoparticles were synthesized based on ionic cross-linking with sodium tripolyphosphate and glycerol as a plasticizer. The emulsified film was prepared through a combination system of Pickering emulsification and water evaporation. The oil-in-water emulsion was prepared by dispersing beeswax into an aqueous colloidal suspension of chitosan nanoparticles using high-speed homogenizer at room temperature. Various properties were characterized, including surface morphology, stability, water vapor barrier, mechanical properties, compatibility, and thermal behaviour. Experimental results established that CNCs and glycerol improve the homogeneity and stability of the beeswax dispersed droplets in the emulsion system which promotes the water-resistant properties but deteriorates the film strength at the same time. When incorporating 2.5% w/w CNCs, the tensile strength of the composite film reached the maximum value, 74.9 MPa, which was 32.5% higher than that of the pure chitosan film, while the optimum one was at 62.5 MPa, and was obtained by the addition of 25% w/w beeswax. All film characterizations demonstrated that the interaction between CNCs and chitosan molecules improved their physical and thermal properties.

The isolation of crystalline regions from fibers cellulose via the hydrolysis route generally requires corrosive chemicals, high-energy demands, and long reaction times, resulting in high economic costs and environmental impact. From this basis, this work seeks to develop environment-friendly processes for the production of Bacterial Cellulose Nanocrystals (BC-NC). To overcome the aforementioned issues, this study proposes a fast, highly-efficient and eco-friendly method for the isolation of cellulose nanocrystals from Bacterial Cellulose, BC. A two-step processes is considered: (1) partial depolymerization of Bacterial Cellulose (DP-BC) under ultrasonic conditions; (2) extraction of crystalline regions (BC-NC) by treatment with diluted HCl catalyzed by metal chlorides (MnCl₂ and FeCl₃.6H₂O) under microwave irradiation. The effect of ultrasonic time and reactant and catalyst concentrations on the index crystallinity (CrI), chemical structure, thermal properties, and surface morphology of DP-BC and BC-NC were evaluated. The results indicated that the ultrasonic treatment induced depolymerization of BC characterized by an increase of the CrI. The microwave assisted by MnCl₂-catalyzed mild acid hydrolysis enhanced the removal of the amorphous regions, yielding BC-NC. A chemical structure analysis demonstrated that the chemical structures of DP-BC and BC-NC remained unchanged after the ultrasonic treatment and MnCl₂-catalyzed acid hydrolysis process.

Chitosan (CH)-based materials are compatible to form biocomposite film for food packaging applications. In order to enhance water resistance and mechanical properties, cellulose can be introduced to the chitosan-based film. In this work, we evaluate the morphology and water resistance of films prepared from chitosan and cellulose in their nanoscale form and study the phenomena underlying the film formation. Nanofluid properties are shown to be dependent on the particle form and drive the morphology of the prepared film. Film thickness and water resistance (in vapor or liquid phase) are clearly enhanced by the adjunction of nanocrystalline cellulose.