Crowding force is an important index in evaluating the safety of those within high density crowds. However, studies on high density crowd simulation models have not been sufficiently developed, and related experimental studies are not sufficiently detailed to guide modeling research. Models that can reproduce real high density crowds and enable calibration of key parameters are lacking. In this study, we improved the typical social force model to simulate high density crowd motion with the calculation of crowding forces. To simulate high density crowds, pedestrians were modeled using the three-circle model, and an agent-based pedestrian model was formulated that can regulate the psychological force automatically according to crowd density. An individual crowd density calculation method is proposed that is more suitable for high density crowds. To calculate real crowding force, body stiffness was formulated and the corresponding parameters were calibrated by a series of experiments. Field experiments show that passengers bear greater force on their backs than the force on each shoulder in metro carriage. The modified model was verified by comparing the simulation results with observed data. We applied this model to the Beijing subway, and the theoretical maximum crowd densities in different seasons were calculated from the perspective of crowding force to ensure the safety of passengers, which are 7.2 people/m 2 in winter and 10.3 people/m 2 in summer. Therefore, to ensure passenger safety, the subway operation department should arrange more trains during winter peak hours.
1 June 2021 in Journal of Urban Planning and Development
A growing number of megacities have been experiencing changes to their landscape due to rapid urbanization trajectories and travel behavior dynamics. Therefore, it is of great significance to investigate the distribution and evolution of a city's urban functional areas over different periods of time. Although the smart card automated fare collection system is already widely used, few studies have used smart card data to infer information about changes in urban functional areas, particularly in developing countries. Thus, this research aims to delineate the dynamic changes that have occurred in urban functional areas based on passengers' travel patterns, using Beijing as a case study. We established a Bayesian framework and applied a Gaussian mixture model derived from transit smart card data in order to gain insight into passengers' travel patterns at station level and then identify the dynamic changes in their corresponding urban functional areas. Our results show that Beijing can be clustered into five different functional areas based on the analysis of corresponding transit station functions: multimodal interchange hub and leisure area; residential area; employment area; mixed but mainly residential area; and mixed residential and employment area. In addition, we found that urban functional areas have experienced slight changes between 2014 and 2017. The findings can be used to inform urban planning strategies designed to tackle urban spatial structure issues, as well as guiding future policy evaluation of urban landscape pattern use.
We present a sustainable multimodal transit system that integrates taxi-sharing with subways to alleviate traffic congestion and restore the cooperative relationship between taxis and subways. This study proposes a two-phase matching model based on optimization theory, in which pick-up/drop-off sequences for participants, as well as their motivation to shift to a TSS service, were considered. For the transportation system, achieving a reduction in vehicle miles is considered to be the matching objective. We tested the matching model using empirical taxi global positioning system (GPS) data for a typical morning rush hour in Beijing. The optimization model performs well for large-scale data and the optimal solution can be calculated quickly, which is ideal in a dynamic system. Furthermore, several sensitive analysis experiments were conducted to evaluate the performance of the TSS system. We found that approximately 23.13% of taxi users can be served by TSS transit, total taxi mileage can be reduced by 20.17%, and carbon dioxide emissions may be reduced by 15.16%. The proposed model and findings demonstrate that the TSS service considered here is a feasible multimodal transit mode, with the advantages of flexibility and sustainability, and has great potential for improving social benefits.
27 June 2018 in Journal of Advanced Transportation
Operational planning in China is perhaps more important today than ever before owing to the ongoing expansion of urban rail in the country. As urban rail networks increase in size and complexity, new lines added to them significantly alter both their topologies and operational characteristics. Thus, appraisal of alternative lines from the perspective of operation while planning is crucial. In this study, a method to forecast demands for new lines and obviate the effects of their addition, in terms of overcrowding in urban rail networks, was developed based on smart card data from existing networks. Using the card data and forecasted demand, transfer demand and section load can be estimated through the route choice model, and hence the influence of new lines on the operation of the network can be analyzed. The results of application of the proposed method to a case of line extension of a network in Beijing showed that it effectively prevented overcrowding by fewer interchanges on the line extension. Approximately 63% of passengers desiring an interchange on the target line altered their interchange from the station that had acted as bottleneck to the new interchange. Consequently, the headway of the feeding line was reduced from 6 min to 3.5 min. Hence, the capacity mismatch problem no longer occurred.
15 June 2023 in Transportation Research Record: Journal of the Transportation Research Board
Crowd analysis and management is a key area of study for transit agencies seeking to optimize their operations and to facilitate safety risk management activities. Key features of crowd analytics include passenger flow volume, crowd density, and walking speed. This study proposes a generalized artificial intelligence (AI)-based crowd analytics model framework for rail transit stations, by analyzing and visualizing crowd analysis data from video records of high-density crowds. Specifically, we propose a generalized AI-aided methodological framework (AI-Crowd) for calculating flow volume, crowd density, and walking speed. You Only Look Once (YOLO) and Deep SORT are integrated into the model framework to detect and track each individual’s dynamic position. Camera calibration is utilized to transform detected trajectories into a real-world coordinate system. Methods for calculating crowd dynamic metrics are formulated based on the data. To validate the model framework, several video records from a platform scenario at a major rail transit station are used. The model’s pedestrian counting accuracy can reach 95% and the fundamental diagrams of density–speed are shown to be consistent with empirical studies. Further crowd analysis of a stair scenario and a transferring passage scenario using the proposed model framework shows some differentiations in walking behavior. The methodology has further practical applications, such as monitoring social distancing.