Lithium-ion batteries have become crucial energy carriers in multiple core fields owing to their excellent comprehensive performance. Nevertheless, as battery energy and power densities continue to rise and operating conditions grow increasingly complex, thermal safety issues have become increasingly prominent. Immersion liquid cooling technology has attracted widespread attention in academic and engineering fields for its outstanding heat transfer and temperature uniformity performance. As a core component of this technology, the selection of liquid coolants is of vital importance. Various coolants investigated in existing studies generally suffer from limitations to varying degrees. Against this backdrop, intrinsically safe fluorocarbon C7H4F12O (3F-135) serves as an ideal liquid cooling medium for lithium-ion batteries, thanks to its high thermal stability, superior electrical insulation and environmental friendliness (zero ODP, extremely low GWP). However, its decomposition mechanism and reaction pathways under extreme thermal runaway conditions of batteries remain unclear. In this study, a tube furnace was adopted to simulate high-temperature environments induced by thermal runaway, and gas chromatography–mass spectrometry (GC-MS) was employed to analyze decomposition products and decomposition ratios of 3F-135. Subsequently, density functional theory (DFT) calculations were utilized to construct the pyrolysis reaction network of 3F-135. Ultimately, the dominant pyrolysis pathways in different temperature ranges were clarified, providing theoretical support for the application and selection of intrinsically safe liquid coolants.
Accurate state-of-charge (SOC) estimation is essential for the safe and efficient operation of lithium-ion batteries. However, the weak voltage observability of lithium iron phosphate (LFP) batteries within the voltage plateau region limits the accuracy of conventional voltage-based methods. To address this issue, an electro–mechanical information fusion framework for SOC estimation is proposed. Fiber Bragg grating (FBG) sensors were employed to simultaneously measure the surface strain and temperature of prismatic LFP batteries. Experimental results showed that the strain signal exhibited a stronger correlation with SOC than the voltage signal, with an average absolute correlation coefficient of 0.92. A Thevenin equivalent circuit model combined with an adaptive forgetting factor recursive least squares (AFFRLS) algorithm was established for online voltage modeling, while a Mamba-based strain model was developed to capture the nonlinear temporal relationship between multidimensional sensing data and battery strain. The two models were further integrated with adaptive unscented Kalman filters (AUKFs) and fused through a dual-layer adaptive weighting strategy. Experimental results under the five operating conditions considered in this study demonstrated that the proposed method achieved average RMSE and MAE values of 0.98% and 0.80%, respectively, outperforming standalone voltage- and strain-based methods.
This study investigates the high-temperature pyrolysis pathways and product distribution of the battery immersion coolant HFE-7300 (C7H3F13O) within a simulated thermal runaway environment. Using a tube furnace system combined with GC-MS analysis across a temperature range of 300–800 °C (residence time of 3 s), the thermal stability and cracking evolution were evaluated. Experimentally, HFE-7300 exhibits low initial decomposition at 400 °C with a pyrolysis rate of 5.84%, which rapidly scales up to 48.72% at 500 °C, and reaches a near-complete degradation of 98.46% at 800 °C. Qualitative product characterization identified C2H4, C2F4, C3F6 C4F8, and C5H3F9O as the primary species evolved. To map the micro-scale degradation trajectories, a reaction network comprising 12 elementary pathways was constructed via density functional theory (DFT) calculations at the B3LYP/6-311+G(d,p) level. Using the TST method, we calculated the reaction rate constants for the main decomposition pathways. Analysis reveals that the C4–C5 bond scission pathway (R6) serves as the predominant initial decomposition channel, yielding C5H3F9O and CF2=CF2 as the definitive primary products. These findings provide baseline thermodynamic data and critical safety insights for the engineering design of immersion-cooled battery thermal management systems.