This paper studies three-dimensional (3D) straight line path following and obstacle avoidance control for an underactuated autonomous underwater vehicle (AUV) without lateral and vertical driving forces. Firstly, the expected angular velocities are designed by using two different methods in the kinematic controller. The first one is a traditional method based on Line-of-sight (LOS) guidance law, and the second one is an improved method based on model predictive control (MPC). At the same time, a penalty item is designed by using the obstacle information detected by onboard sensors, which can realize the real-time obstacle avoidance of the unknown obstacle. Then, in order to overcome the uncertainty of the dynamics model and the saturation of actual control input, the dynamic controller is designed by using sliding mode control (SMC) technology. Finally, in the simulation experiment, the performance of the improved control method is verified by comparison with two traditional control methods based on LOS guidance law. Since the constraint of an AUV’s angular velocities are considered in MPC, simulation results show that the improved control method uses MPC, and SMC not only improves the tracking quality of the AUV when switching paths near the waypoints and realizes real-time obstacle avoidance but also effectively reduces the mean square error (MSE) and saturation rate of the rudder angle. Therefore, this control method is more conducive to the system stability and saves energy.

Using the bilevel optimization (BIO) scheme, this paper presents a time-optimal path planner for autonomous underwater vehicles (AUVs) operating in grid-based environments with ocean currents. In this scheme, the upper optimization problem is defined as finding a free-collision channel from a starting point to a destination, which consists of connected grids, and the lower optimization problem is defined as finding an energy-optimal path in the channel generated by the upper level algorithm. The proposed scheme is integrated with ant colony algorithm as the upper level and quantum-behaved particle swarm optimization as the lower level and tested to find an energy-optimal path for AUV navigating through an ocean environment in the presence of obstacles. This arrangement prevents discrete state transitions that constrain a vehicle’s motion to a small set of headings and improves efficiency by the usage of evolutionary algorithms. Simulation results show that the proposed BIO scheme has higher computation efficiency with a slightly lower fitness value than sliding wavefront expansion scheme, which is a grid-based path planner with continuous motion directions.

The development of domestic offshore petroleum engineering is faced with opportunities and challenges under the situation dominated by the seller across the complex international petroleum market. The cost of drilling and well completion accounts for more than half of the budget, also directly affect the feasibility of offshore oilfield development. Therefore, to effectively improve the management level of offshore drilling and well completion, "speed, quality, production and efficiency" are the main problems faced by the workers. The meaning of cost management, and influencing factors, and the current status of drilling cost control has been introduced in this paper. The aim will be to provide reference value for the subsequent development of offshore oil drilling and well completion and the cost management of related oil industry.