In this paper, some recent piezoelectric wafer active sensors (PWAS) progress achieved in our laboratory for active materials and smart structures (LAMSS) at the University of South Carolina: http: //www.me.sc.edu/research/lamss/ group is presented. First, the characterization of the PWAS materials shows that no significant change in the microstructure after exposure to high temperature and nuclear radiation, and the PWAS transducer can be used in harsh environments for structural health monitoring (SHM) applications. Next, PWAS active sensing of various damage types in aluminum and composite structures are explored. PWAS transducers can successfully detect the simulated crack and corrosion damage in aluminum plates through the wavefield analysis, and the simulated delamination damage in composite plates through the damage imaging method. Finally, the novel use of PWAS transducers as acoustic emission (AE) sensors for in situ AE detection during fatigue crack growth is presented. The time of arrival of AE signals at multiple PWAS transducers confirms that the AE signals are originating from the crack, and that the amplitude decay due to geometric spreading is observed.

Composite structures may be subjected to internal damages caused by impact events, which can seriously degrade the property of the structures. Hence, impact monitoring is of great importance to ensure the applications of composite, especially in aerospace engineering. This paper puts forward, for the first time, a new multi-response-based wireless sensor network (WSN) to realize the large-scale impact monitoring with the weight and complexity of the monitoring system reduced greatly. A novel multi-response-based global impact localization method that can unite multiple leaf nodes to solve the problems of localization confliction and mid-region localization is proposed for the WSN. Evaluations performed on large-scale complex composite structures have shown the advantages of the presented new methods.

Guided wave attenuation in composites due to material damping is strong, anisotropic, and cannot be neglected. Material damping is a critical parameter in selection of a particular wave mode for long-range structural health monitoring in composites. In this article, a semi-analytical finite element approach is presented to model guided wave excitation and propagation in damped composite plates. The theoretical framework is formulated using finite element method to describe the material behavior in the thickness direction while assuming analytical expressions in the wave propagation direction along the plate. In the proposed method, the Kelvin–Voigt damping model using a complex frequency-dependent stiffness matrix is utilized to account for anisotropic damping effects of composites. Thus, the existing semi-analytical finite element approach is being extended to include material damping effect. Theoretical predictions are experimentally validated using scanning laser Doppler vibrometer measurements of guided wave propagation generated by a circular piezoelectric wafer active sensor transducer in a unidirectional carbon fiber reinforced polymer composite plate. The proposed method achieves good agreement with the experimental results.

For aerospace application of structural health monitoring (SHM) technology, the problem of reliable damage monitoring under time-varying conditions must be addressed and the SHM technology has to be fully validated on real aircraft structures under realistic load conditions on ground before it can reach the status of flight test. In this paper, the guided wave (GW) based SHM method is applied to a full-scale aircraft fatigue test which is one of the most similar test status to the flight test. To deal with the time-varying problem, a GW-Gaussian mixture model (GW-GMM) is proposed. The probability characteristic of GW features, which is introduced by time-varying conditions is modeled by GW-GMM. The weak cumulative variation trend of the crack propagation, which is mixed in time-varying influence can be tracked by the GW-GMM migration during on-line damage monitoring process. A best match based Kullback–Leibler divergence is proposed to measure the GW-GMM migration degree to reveal the crack propagation. The method is validated in the full-scale aircraft fatigue test. The validation results indicate that the reliable crack propagation monitoring of the left landing gear spar and the right wing panel under realistic load conditions are achieved.

This paper presents a new methodology for detecting various types of composite damage, such as delamination and impact damage, through the application of multimode guided waves. The basic idea is that various wave modes have different interactions with various types of composite damage. Using this method, selective excitations of pure-mode guided waves were achieved using adjustable angle beam transducers (ABTs). The tuning angles of various wave modes were calculated using Snell’s law applied to the theoretical dispersion curves of composite plates. Pitch–catch experiments were conducted on a 2-mm quasi-isotropic carbon fiber-reinforced polymer (CFRP) composite plate to validate the excitations of pure fundamental symmetric mode (S0) and shear horizontal mode (SH0). The generated pure S0 mode and SH0 mode were used to detect and separate the simulated delamination and actual impact damage. It was observed that S0 mode was only sensitive to the impact damage, while SH0 mode was sensitive to both simulated delamination and impact damage. The use of pure S0 and SH0 modes allowed for damage separation. In addition, the proposed method was applied to a 3-mm-thick quasi-isotropic CFRP composite plate using multimode guided wave detection to distinguish between delamination and impact damage. The experimental results demonstrated that the proposed method has a good capability to detect and separate various damage types in composite structures.