An evaluation method for bainite transformation kinetics was established by theoretical derivation, dilatometric curve analysis, and microstructure observation. The isothermal transformation of ultra-fine bainite under different austenitizing temperatures and contents of prior martensite was studied using a DIL805L dilatometer. The kinetic parameters (activation energy Q*, autocatalytic factor λ, temperature rate constant κ, unit volume transformation rate, and the number density of nucleation sites Ni) of ultra-fine bainite transformation under different austenitizing temperatures and contents of prior martensite were calculated based on the displacement growth bainite dynamics model. It was found that the autocatalytic factor λ is linear with the austenite grain size d, and the number density of nucleation sites Ni is closely related to the average volume of the bainite subunit Vb. Moreover, the formation of prior martensite and its increase can increase the number of nucleation sites and the nucleation rate of the ultra-fine bainite; thus, the ultra-fine bainite transformation can be accelerated.
The stress relaxation behaviour of Cu–0.23Cr–0.08Ag alloy was studied at different deformations (10%, 20%, 30%). The high percentage of low ΣCSL (Coincidence Site Lattice) grain boundary could improve the stress relaxation resistance of the alloy. There are two main factors affecting the stress relaxation resistance: one is the pinning effect of Cr to movable dislocations; the other is the obstacle of twins to the movement of movable dislocations.
Galfan (Zn-5Al-RE) coating is widely used in high-strength steel wires. The effects of cooling rate and the adulteration of erbium (Er) on the microstructure and corrosion resistance of Zn-5Al alloys were investigated in this study. The results show that the Zn-5Al alloy is made up of the primary η-Zn phase and eutectic structure at a high cooling rate. As the cooling rate decreases, the corrosion current firstly increased and then decreased due to decrease of the primary η-Zn content, the appearance and grew of α-Al phase. Moreover, the addition of Er leads to the formation of Er-containing intermetallic compounds in the Zn-5Al alloy, reducing the size of the primary η-Zn and α-Al phase, decreasing the corrosion current density, and improving the density and compactness of the corrosion product.
19 November 2018 in Advanced Engineering Materials