A new type of atmospheric-pressure non-thermal plasma source was developed by a combining a low-frequency (LF) plasma jet with microwave plasma as a hybrid plasma. The LF-microwave hybrid plasma has a large amount of reactive species compared to conventional LF plasma jet owing to higher-energy electrons, which are accelerated by the oscillating electric fields of the microwave. Moreover, it can be sustained stably at a higher composition rate of the process gas in the discharge gas. The objective of this study is to investigate the effect of the admixture gas composition on surface sterilization by using our self-designed LF-microwave hybrid plasma source. The influence of the discharge gas composition ratio between oxygen and argon on the production of the reactive species and sterilization effect was investigated. The analysis of the optical emission spectra and the reaction of the chemical indicators reveal that reactive oxygen increases with the increasing ratio of oxygen in the oxygen-argon admixture discharge gas up to an oxygen ratio of 10% and then it saturates. In contrast, the results of the sterilization test using biological indicators indicate that a higher sterilization effect was obtained for a lower ratio of oxygen in the admixture discharge gas. It is considered that reactive species, except reactive oxygen, are related to surface sterilization using atmospheric-pressure non-thermal plasma.
26 August 2020 in IEEE Transactions on Plasma Science
The plasma surface sterilization method has emerged as a new sterilization method for medical instruments with many advantages, including nontoxicity, short treatment time, and low thermal damage to the sterilized material, over conventional sterilization methods. In this study, low-frequency (LF)-microwave hybrid plasma is produced by irradiation of microwave to an LF plasma jet. This hybrid plasma is characterized by atmospheric-pressure nonthermal plasma with a large amount of reactive species and has been applied for plasma surface sterilization. To reduce the treatment temperature while maintaining the effect of surface sterilization for applicability to heat-sensitive materials, the LF-microwave hybrid plasma was modulated in time by using pulsed microwaves. It was found that the gas temperature of the LF-microwave hybrid plasma produced by pulsed microwaves can be much lower than that of the LF-microwave hybrid plasma produced by continuous microwaves. Moreover, the gas temperature of the plasma was found to depend on the pulsewidth and duty ratio of microwaves used to produce it even if the time-averaged microwave power remained constant. Analyses of the optical emission spectra and chemical indicator tests indicated that the number of reactive oxygen radicals produced in the LF-microwave hybrid plasma also depends on the pulsewidth and duty ratio of the microwaves. In addition, it was found that the dependence of the number of oxygen atoms produced in the LF-microwave hybrid plasma on the microwave pulsewidth is opposite to that of the gas temperature. Spore-forming bacteria (Geobacillus stearothermophilus) with a population of 2.4 x 106 CFU/0.25'' x1.5'' in a paper strip were sterilized for 1 min at a treatment temperature of 82.43 °C using pulsed LF-microwave hybrid plasma. The temperature and time of sterilization with the pulsed LF-microwave hybrid plasma were found to be lower than those with continuous LF-microwave hybrid plasma.
11 November 2022 in Japanese Journal of Applied Physics
The atmospheric pressure non-thermal plasma generated by low-frequency (LF)-microwave hybrid discharge has been employed to investigate the effects of plasma treatment on the germination and growth of radish (Raphanus sativus L.) sprout seeds. The plasma generated with admixture discharge gas of Ar-O2 was adopted for the irradiation of seeds. Scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX) analyses were performed to elucidate the physical and chemical state changes of seed surfaces after plasma treatment. The reactive species produced in the plasma were investigated using optical emission spectroscopy (OES) and chemical indicator (CI). The results demonstrate that higher reactive oxygen species were generated from the LF-microwave hybrid plasma compared to conventional LF plasma jet. Moreover, the higher germination percentage and shorter germination time were obtained with the LF-microwave hybrid plasma compared to LF plasma jet and control group. It is considered that reactive species produced in the LF-microwave hybrid plasma are related to the germination time of the radish sprout seed.
19 October 2020 in Japanese Journal of Applied Physics
Surface sterilization using LF-microwave hybrid plasma, which is a low-frequency (LF) plasma jet assisted by a microwave discharge, was investigated. Hybrid plasma is an atmospheric pressure non-thermal plasma and has a large number of reactive species. To improve the performance of surface sterilization using LF-microwave hybrid plasma, two types of discharge gas supply systems were employed. The first type (Type I) introduces argon and oxygen gas flows separately into the discharge region. The second type (Type II) introduces a mixture of two gases into the discharge region. The analysis of optical emission spectra and chemical indicators showed that more reactive oxygen species were produced by the Type II gas supply system compared to that by Type I. Moreover, a lower gas temperature was obtained with the Type II system compared to that with Type I. The results of the sterilization test show that a higher sterilization effect was obtained for the gas supply system Type II. The spore-forming bacteria ( Geobacillus stearothermophilus ) with a population of 2.4 × 10 6 CFU/carrier were sterilized for 50 s at the treatment temperature of 77.5 °C using the Type II gas supply system.
12 October 2023 in Japanese Journal of Applied Physics
The current study intends to examine the impact of non-thermal plasma generated by a low-frequency microwave hybrid plasma (LFMHP) on the germination and growth of radish (Raphanus sativus L.) sprout seeds. Plasma activated water (PAW) was utilized as part of the experimental approach for this investigation. The chemical indicator analysis revealed that the LFMHP generated a significantly higher concentration of reactive oxygen species compared with the conventional LF plasma jet (LF-PJ). The application of LFMHP treatment on PAW led to higher germination percentages and improved germination potential in radish sprout seeds compared to both the LF-PJ and control group treatments. Additionally, the average length of radish sprouts treated with PAW using the LFMHP was longer in comparison to those treated with PAW using the LF-PJ and the control group. The findings from this study suggest that PAW treated with LFMHP enhances both the germination and plants growth. Furthermore, this study observed that shows a crucial role in influencing the growth rate of radish sprouts.
Pantograph support insulators are critical for maintaining reliable power transmission in electric railway systems. However, conventional porcelain insulators suffer from contamination buildup, leading to leakage currents and flashover risks. This study investigates nanotitanium dioxide (TiO₂) coatings to enhance porcelain insulator performance. X-ray diffraction (XRD) analysis confirmed the transformation of P25 TiO₂ into the rutile phase at 1240°C, improving durability and electrical properties. Energy-dispersive X-ray spectroscopy (EDX) verified uniform TiO₂ distribution, while field emission scanning electron microscopy (FE-SEM) revealed a smooth glaze layer. Electrical testing demonstrated a 52.11% reduction in leakage current for nanoTiO₂-coated insulators under 11 kV conditions, attributed to enhanced hydrophobicity and photocatalytic self-cleaning. These results highlight the feasibility of integrating nanoTiO₂ coatings into insulator manufacturing for reduced maintenance and improved reliability.