Owing to the unique electromagnetic response ability, electromagnetic metasurface have potential applications in medical, imaging, sensing, and other fields. In this paper, a graphene-based THz metasurface sensor with an air spacer layer is designed by combining the advantages of the air spacer structure and the dynamic tunability of graphene materials. The proposed metasurface sensor consists of six layers, which are silicon dioxide (SiO2) substrate, metal reflector, air layer, graphene metasurface etched with microstructure, ion-gel layer and silicon dioxide dielectric layer from bottom to top. A comprehensive study of the absorption properties and sensing performance are carried out which is simulated and analyzed with the help of CST Microwave Studio software. The calculation results show that the two obvious resonance absorption peaks located at 0.95 THz and 1.53 THz with absorption of 94.9% and 79%, respectively, and there is a good linear relationship between the absorption peak and dielectric parameters of analyte. The frequency shift sensitivity of the two resonance peaks M1 and M2 can reach 450 GHz/RIU and 717 GHz/RIU, respectively. By changing the thickness of the air layer, when the two resonance peaks M1 and M2 reach the maximum absorption at and , respectively, the frequency shift sensitivity is still as high as close to 450 GHz/RIU. The influence of structure parameters and incident angle on the absorption spectrum shows that the proposed structure has good stability and reliability. The proposed graphene-based absorption sensor has good biocompatibility, broadening the application range of terahertz functional devices.
All-optical amplify-and-forward (OAF) relaying technique can amplify and filter the attenuated optical signal in optical domain, and thus is regarded as a simple way to extend the transmission distance of free-space optical (FSO) communication systems. At the relaying node, however, the incident background radiation and the amplified spontaneous emission noise of the deployed erbium-doped fiber amplifier will deteriorate the optical signal-to-noise, therefore causing the degradation of the system's bit error ratio (BER). In this paper, we perform simulations and experiments on FSO system with on-off keying (OOK) and differential phase-shift keying (DPSK) signals, focusing on the receiving sensitivity loss (RSL) of the OAF-assisted dual-hop system. Taking the BER level of 10 -7 as the reference, we find that the DPSK system suffers more than 8 dB RSL at the data rate of 5 Gb/s in simulation, while the OOK system gets less than 1 dB RSL at the same data rate. In the following experiments, the obtained results exhibit that RSL of DPSK system is nearly 10 dB, which of OOK system is less than 1.5 dB, shown similarly property to the simulations.
We propose a scheme for achieving basic quantum gates using ultracold polar molecules in pendular states. The qubits are encoded in the YbF molecules trapped in an electric field with a certain gradient and coupled by the dipole–dipole interaction. The time-dependent control sequences consisting of multiple pulses are considered to interact with the pendular qubits. To achieve high-fidelity quantum gates, we map the control problem for the coupled molecular system into a Markov decision process and deal with it using the techniques of deep reinforcement learning (DRL). By training the agents over multiple episodes, the optimal control pulse sequences for the two-qubit gates of NOT, controlled NOT, and Hadamard are discovered with high fidelities. Moreover, the population dynamics of YbF molecules driven by the discovered gate sequences are analyzed in detail. Furthermore, by combining the optimal gate sequences, we successfully simulate the quantum circuit for entanglement. Our findings could offer new insights into efficiently controlling molecular systems for practical molecule-based quantum computing using DRL.