This work reports the study, via the combination of Rutherford backscattering spectrometry and channeling, x-ray diffraction, and transmission electron microscopy experiments, of the damage formation in cubic yttria-stabilized zirconia single crystals irradiated with medium-energy (4 MeV) heavy (Au) ions. The damage buildup, which is accounted for in the framework of the multistep damage accumulation model, occurs in three steps. The first step at low fluences (up to ), characterized by a regular increase in both the damage yield and the elastic strain, is related to the formation of small defect clusters. The second step in the intermediate fluence range (from to ) leads to a sharp increase in the damage yield and to a large drop of the strain due to the formation of dislocation loops which collapse into a network of tangled dislocations. The third step at high fluences (above ) exhibits a surprising decrease in the damage yield, which may be attributed to the reorganization of the dislocation network that leads to the formation of weakly damaged regions with a size of the order of 100 nm.
The damage induced in GaAs crystals irradiated with dual-ion beam (low-energy I2+ and high-energy Fe9+), producing simultaneous nuclear (Sn) and electronic (Se) energy depositions, was investigated using several characterization techniques. Analysis of the damage buildup shows that Sn alone (single 900 keV ion beam) leads, in a two-step process, to full amorphization of the irradiated layer (at a fluence of 1.5 nm−2) and to the development of a high (2.2%) elastic strain. Conversely, only one step in the disordering process is observed upon dual-ion beam irradiation (i.e., 900 keV I2+ and 27 MeV Fe9+, Sn&Se); hence, amorphization is prevented and the elastic strain remains very weak (below 0.2%). These results provide a strong evidence that, in GaAs, the electronic energy deposition can induce an efficient dynamic annealing of the damage created in collision cascades formed during nuclear energy deposition.
Strain engineering using ion beams is a current topic of research interest in semiconductor materials. Synchrotron-based high-resolution x-ray diffraction has been utilized for strain-depth analysis in GaAs irradiated with 300 keV Ar and 4H-SiC and GaAs irradiated with 100 MeV Ag ions. The direct displacement-related defect formation, anticipated from the elastic energy loss of Ar ions, can well explain the irradiation-induced strain depth profiles. The maximum strain in GaAs is evaluated to be 0.88% after Ar irradiation. The unique energy loss depth profile of 100 MeV Ag (swift heavy ions; SHIs) and resistance of pristine 4H-SiC and GaAs to form amorphous/highly disordered ion tracks by ionization energy loss of monatomic ions allow us to examine strain buildup due to the concentrated displacement damage by the elastic energy loss near the end of ion range (∼12 μm). Interestingly, for the case of SHIs, the strain-depth evolution requires consideration of recovery by ionization energy loss component in addition to the elastic displacement damage. For GaAs, strain builds up throughout the ion range, and the maximum strain increases and then saturates at 0.37% above an ion fluence of 3×1013 Ag/cm2. For 4H-SiC, the maximum strain reaches 4.6% and then starts to recover for fluences above 1×1013 Ag/cm2. Finally, the contribution of irradiation defects and the purely mechanical contribution to the total strain have been considered to understand the response of different compounds to ion irradiation.