Renfei Gao

Ms. Renfei Gao


Research Focus & Metrics

Academic Career Length

1Year (2026-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 June 2026 in Materials
Verified
Journal Article
Open access
PDF file
RGRenfei Gao
Renfei Gao
ZLZhu Lianyong
Zhu Lianyong
PLPengchang Liang
Pengchang Liang
WWWeizi Wang
Weizi Wang
RYRuize Yin
Ruize Yin
Against the backdrop of rapid development in low-carbon building materials, geopolymer mortar has become a high-quality alternative to traditional cement-based materials due to its advantages of environmental friendliness, high strength, and excellent durability. However, its inherent brittleness and tendency to crack severely limit its widespread adoption and use in engineering. To mitigate the inherent brittleness of geopolymer mortar, this study developed a ternary binder system composed of metakaolin, slag, and fly ash. The effects of basalt fiber contents of 0%, 0.25%, 0.50%, 0.75%, 1.00%, and 1.25% by mass on the flowability, flexural strength, compressive strength, and deformation behavior of the geopolymer mortar were systematically investigated. The evolution of the displacement and strain fields during flexural and compressive loading was monitored in real time using two-dimensional digital image correlation (2D-DIC). The fiber-reinforcement mechanism was further examined by X-ray diffraction (XRD), scanning electron microscopy (SEM), and Fourier transform infrared spectroscopy (FTIR). The results show that basalt fiber reduces mortar flowability, and the reduction becomes more pronounced with increasing fiber content. The flexural strength first increased and then decreased with increasing fiber content; at 0.50% fiber content, the 28-day flexural strength reached 12.6 MPa, which was 8.2% higher than that of the fiber-free control. The compressive strength increased only slightly at a low fiber content of 0.25% and then decreased when the fiber content exceeded 0.50%. The 2D-DIC results indicate that a moderate fiber content (0.50–0.75%) markedly increased the ultimate displacement, delayed crack propagation, and enhanced the post-cracking deformation capacity. Microstructural observations revealed that an appropriate fiber content promoted good interfacial bonding with the matrix and enabled fiber bridging and crack resistance. In contrast, excessive fiber addition caused agglomeration-induced micropores and microcracks, thereby degrading mechanical properties. Overall, the recommended basalt fiber content is 0.25–0.50%. These findings provide a theoretical and experimental basis for optimizing high-performance, low-carbon geopolymer mortar for engineering applications.

29 July 2026 in Materials
Verified
Journal Article
Open access
PDF file
WWWeizi Wang
Weizi Wang
ZLZhu Lianyong
Zhu Lianyong
TLTao Li
Tao Li
RGRenfei Gao
Renfei Gao
To improve the mechanical performance and crack resistance of coal gangue–slag geopolymer concrete, basalt fiber-reinforced geopolymer concrete was prepared using calcined coal gangue powder and slag as composite precursors. The effects of nano-SiO2 dosage on strength, water absorption, and crack evolution under splitting tensile loading were investigated. Digital image correlation (DIC), scanning electron microscopy (SEM), and mercury intrusion porosimetry (MIP) were further employed to characterize the crack evolution and microstructural changes associated with nano-SiO2 incorporation. The results show that the performance of the specimens was strongly dependent on the nano-SiO2 dosage, with the NS0.5 mixture (0.5% nano-SiO2) exhibiting the most pronounced improvement. Compared with the reference mixture, the 28 d compressive strength and splitting tensile strength of NS0.5 reached 86.80 MPa and 6.02 MPa, corresponding to increases of 17.67% and 39.97%, respectively; meanwhile, the 24 h water absorption decreased from 4.78% to 4.25%. The DIC results indicate that 0.5% nano-SiO2 delayed the localization of maximum principal strain and the penetration of the main crack, reducing the peak crack width from 0.487 mm to 0.222 mm, with a reduction of 54.4%. The microstructural results show that an appropriate nano-SiO2 dosage reduced the total porosity from 13.93% to 5.03%, shifted the pore structure from macropore-dominated to fine-pore-dominated, and decreased the proportion of coarse connected pores and crack-like pores. In contrast, the reduced enhancement observed at higher nano-SiO2 dosages may be associated with poorer nanoparticle dispersion and increased local heterogeneity, although particle agglomeration was not directly verified in this study. Overall, the improvements obtained with 0.5% nano-SiO2 are directly consistent with matrix densification and pore-structure refinement. Micro-filling, heterogeneous nucleation, and additional gel formation are proposed as plausible contributing mechanisms rather than directly verified processes.