Ivan Gabriel-Martin

Mr. Ivan Gabriel-Martin


Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 July 2017 in Journal of Hydrology
Verified
Journal Article
Closed access
IGIvan Gabriel-Martin
Ivan Gabriel-Martin
ASAlvaro Sordo
Alvaro Sordo
Luis GarroteLuis Garrote
Luis Garrote
LCLuis G. Castillo
Luis G. Castillo

5 March 2019 in Water
Verified
Journal Article
Open access
IGIvan Gabriel-Martin
Ivan Gabriel-Martin
ASAlvaro Sordo
Alvaro Sordo
Luis GarroteLuis Garrote
Luis Garrote
IGIsabel Granados
Isabel Granados
In this paper, we present a method to assess the influence of the initial reservoir level in hydrological dam safety and risk analysis. Traditionally, in professional practice, the procedures applied are basically deterministic. Several physical processes are defined deterministically, according to the criteria of the designer (usually in the conservative side), although there is a high degree of uncertainty regarding these processes. A relevant variable is the reservoir level considered at the beginning of flood events. Hydrological dam safety assessment methods traditionally assume that the reservoir is initially full when it receives the design flood, thus, staying in the conservative side when designing a new dam. However, the distribution of reservoir levels at the beginning of flood episodes takes more importance for evaluating the real risk for the dams in operation. We analyzed three different scenarios—initial reservoir level equal to maximum normal level, equal to a maximum conservation level, and following the probability distribution from the historical records. To do so, we presented a method applied to a gated-spillway dam located in the Tagus river basin. A set of 100,000 inflow hydrographs was generated through a Monte Carlo procedure, by reproducing the statistics of the main observed hydrograph characteristics—peak flow, volume, and duration. The set of 100,000 hydrographs was routed through the reservoir applying the Volumetric Evaluation Method as a flood control strategy. In order to compare the three scenarios, we applied an economic global risk index. The index combines the hydrological risk for the dam, linked to the maximum water level reached in the reservoir, during the flood routing, and the flood risk in the downstream river reach, linked to the discharge releases from the dam. The results showed the importance of accounting for the fluctuation of initial reservoir levels, for assessing the risk related to hydrological dam safety. Furthermore, a procedure to quantify the uncertainty associated with the effects of initial reservoir level on hydrological dam safety, has been proposed.

28 March 2017 in Water
Verified
Journal Article
Open access
PDF file
ASAlvaro Sordo
Alvaro Sordo
IGIvan Gabriel-Martin
Ivan Gabriel-Martin
PBPaola Bianucci
Paola Bianucci
Luis GarroteLuis Garrote
Luis Garrote
The study presents a method which can be used to define real-time operation rules for gated spillways (named the K-Method). The K-Method is defined to improve the performance of the Volumetric Evaluation Method (VEM), by adapting it to the particular conditions of the basin, the reservoir, or the spillway. The VEM was proposed by the Spanish engineer Fernando Girón in 1988 and is largely used for the specification of dam management rules during floods in Spain. This method states that outflows are lower than or equal to antecedent inflows, outflows increase when inflows increase, and the higher the reservoir level, the higher the percentage of outflow increase. The K-Method was developed by modifying the VEM and by including a K parameter which affects the released flows. A Monte Carlo environment was developed to evaluate the method under a wide range of inflow conditions (100,000 hydrographs) and with return periods ranging from one to 10,000 years. The methodology was applied to the Talave reservoir, located in the South-East of Spain. The results show that K-values higher than one always reduce the maximum reservoir levels reached in the dam. For K-values ranging from one to ten, and for inflow hydrographs with return periods higher than 100 years, we found a decrease in the maximum levels and outflows, when compared to the VEM. Finally, by carrying out a dam risk analysis, a K-value of 5.25 reduced the expected annual damage by 8.4% compared to the VEM, which represents a lowering of 17.3% of the maximum possible reduction, determined by the application of an optimizer based on mixed integer linear programming (MILP method).

1 April 2020 in Water
Verified
Journal Article
Open access
PDF file
IGIvan Gabriel-Martin
Ivan Gabriel-Martin
ASAlvaro Sordo
Alvaro Sordo
David SantillánDavid Santillán
David Santillán
Luis GarroteLuis Garrote
Luis Garrote
The aim of this study is to contribute to solving conflicts that arise in the operation of multipurpose reservoirs when determining maximum conservation levels (MCLs). The specification of MCLs in reservoirs that are operated for water supply and flood control may imply a reduction in the volume of water supplied with a pre-defined reliability in the system. The procedure presented in this study consists of the joint optimization of the reservoir yield with a specific reliability subject to constraints imposed by hydrological dam safety and downstream river safety. We analyzed two different scenarios by considering constant or variable initial reservoir level prior to extreme flood events. In order to achieve the global optimum configuration of MCLs for each season, we propose the joint optimization of three variables: minimize the maximum reservoir level (return period of 1000 years), minimize the maximum released outflow (return period of 500 years) and maximize the reservoir yield with 90% reliability. We applied the methodology to Riaño Dam, jointly operated for irrigation and flood control. Improvements in the maximum reservoir yield (with 90% reliability) increased up to 10.1% with respect to the currently supplied annual demand (545 hm3) for the same level of dam and downstream hydrological safety. The improvement could increase up to 26.8% when compared to deterministic procedures. Moreover, dam stakeholders can select from a set of Pareto-optimal configurations depending on if their main emphasis is to maintain/increase the hydrological safety, or rather to maintain/increase the reservoir yield.

4 February 2021 in Water
Verified
Journal Article
Open access
PDF file
MPMatteo Pampaloni
Matteo Pampaloni
ASAlvaro Sordo
Alvaro Sordo
PBPaola Bianucci
Paola Bianucci
IGIvan Gabriel-Martin
Ivan Gabriel-Martin
ECEnrica Caporali
Enrica Caporali
Luis GarroteLuis Garrote
Luis Garrote
Hydrological design of Sustainable urban Drainage Systems (SuDS) is commonly achieved by estimating rainfall volumetric percentiles from daily rainfall series. Nevertheless, urban watersheds demand rainfall data at sub-hourly time step. Temporal disaggregation of daily rainfall records using stochastic methodologies can be applied to improve SuDS design parameters. This paper is aimed to analyze the ability of the synthetic rainfall generation process to reproduce the main characteristics of the observed rainfall and the estimation of the hydrologic parameters often used for SuDS design and by using the generally available daily rainfall data. Other specifics objectives are to analyze the effect of Minimum Inter-event Time (MIT) and storm volume threshold on rainfall volumetric percentiles commonly used in SuDS design. The reliability of the stochastic spatial-temporal model RainSim V.3 to reproduce observed key characteristics of rainfall pattern and volumetric percentiles, was also investigated. Observed and simulated continuous rainfall series with sub-hourly time-step were used to calculate four key characteristics of rainfall and two types of rainfall volumetric percentiles. To separate independent rainstorm events, MIT values of 3, 6, 12, 24, 48 and 72 h and storm volume thresholds of 0.2, 0.5, 1 and 2 mm were considered. Results show that the proposed methodology improves the estimation of the key characteristics of the rainfall events as well as the hydrologic parameters for SuDS design, compared with values directly deduced from the observed rainfall series with daily time-step. Moreover, MITs rainfall volumetric percentiles of total number of rainfall events are very sensitive to MIT and threshold values, while percentiles of total volume of accumulated rainfall series are sensitive only to MIT values.

11 September 2019 in Water
Verified
Journal Article
Open access
PDF file
IGIvan Gabriel-Martin
Ivan Gabriel-Martin
ASAlvaro Sordo
Alvaro Sordo
Luis GarroteLuis Garrote
Luis Garrote
Juan GarciaJuan Garcia
Juan Garcia
This paper focuses on proposing the minimum number of storms necessary to derive the extreme flood hydrographs accurately through event-based modelling. To do so, we analyzed the results obtained by coupling a continuous stochastic weather generator (the Advanced WEather GENerator) with a continuous distributed physically-based hydrological model (the TIN-based real-time integrated basin simulator), and by simulating 5000 years of hourly flow at the basin outlet. We modelled the outflows in a basin named Peacheater Creek located in Oklahoma, USA. Afterwards, we separated the independent rainfall events within the 5000 years of hourly weather forcing, and obtained the flood event associated to each storm from the continuous hourly flow. We ranked all the rainfall events within each year according to three criteria: Total depth, maximum intensity, and total duration. Finally, we compared the flood events obtained from the continuous simulation to those considering the N highest storm events per year according to the three criteria and by focusing on four different aspects: Magnitude and recurrence of the maximum annual peak-flow and volume, seasonality of floods, dependence among maximum peak-flows and volumes, and bivariate return periods. The main results are: (a) Considering the five largest total depth storms per year generates the maximum annual peak-flow and volume, with a probability of 94% and 99%, respectively and, for return periods higher than 50 years, the probability increases to 99% in both cases; (b) considering the five largest total depth storms per year the seasonality of flood is reproduced with an error of less than 4% and (c) bivariate properties between the peak-flow and volume are preserved, with an error on the estimation of the copula fitted of less than 2%.