Inclusion of rubber into concrete changes its behavior and the established shape of its stress-strain curve. Existing constitutive stress-strain models for concrete are not valid in case of rubberized concrete, and currently available modified models require additional validation on a larger database of experimental results, with a wider set of influential parameters. By executing uniaxial compressive tests on concrete with rubber substituting 10%, 20%, 30%, and 40% of aggregate, it was possible to study and evaluate the influence of rubber content on its mechanical behavior. The stress-strain curve was investigated in its entirety, including compressive strength, elastic modulus, strains at significant levels of stress, and failure patterns. Experimental results indicated that increase of rubber content linearly decreases compressive strength and elastic modulus, but increases ductility. By comparing experimental stress-strain curves with those plotted using available constitutive stress-strain models it was concluded that they are inadequate for rubberized concrete with high rubber content. Based on determined deviations an improvement of an existing model was proposed, which provides better agreement with experimental curves. Obtained research results enabled important insights into correlations between rubber content and changes of the stress-strain curve required when utilizing nonlinear material properties.

Agricultural biomass ash is a waste material produced by incineration of residue from fields after harvesting crops. The use of agricultural biomass in industry produces large quantities of ash that represent an ecological problem. Another ecological problem is the dependency of road building on natural materials, which has been traditionally used for all pavement layers. Today, roads are built on less accessible and suitable terrains, increasing the need for improving the mechanical characteristics of locally available materials by various means of stabilisation. Within this research, three agricultural biomass fly ashes are used as lime substitutes for hydraulically stabilised soil. The purpose of this research is evaluation of potential use of agricultural biomass fly ash for the soil stabilisation of road works, i.e., for embankment and subgrade purposes. The results indicate that there is a potential of using barley, sunflower seed shells and wheat fly ash as lime substitutes in the soil stabilisation of road works. The strength characteristics of stabilised soil incorporating biomass fly ash are highly dependent on its chemical composition. Using a three-dimensional digital image correlation technique, it is concluded that the elastic properties of stabilised soil correlate to a fracture mechanism that can be efficiently defined by this modern research tool.

Iako je aluminij već dugo prisutan konstrukcijski materijal, uporaba mu nije u skladu s dobrobitima koji se ostvaruju njegovom primjenom. Nekoliko je uzročnika takvog stanja. Ističu se relativno kasni razvoj normativnog okvira za...