Due to recent climate change, urban flood damage is increasing. Current urban flood prediction has been mainly conducted by performing numerical simulations for various return period scenarios and producing inundation maps based on the results. However, this method has disadvantages in that it is difficult to predict arbitrary rainfall events or intermediate frequencies that can occur other than the fixed scenarios, and it is difficult to respond in real-time because the computation time of numerical simulations is significantly long. Therefore, to overcome these challenges, this study developed a 'scientific interpolation method' to estimate urban inundation maps for arbitrary frequencies by leveraging pre-constructed flood scenario data. We utilized simulation results from a self-developed Python-based urban flood model as a benchmark to derive the fundamental governing equations and related parameters. An Inverse Analysis technique was applied to mathematically reconstruct the non-linear relationship between rainfall frequency and inundation depth. Consequently, the inundation depths and extents for arbitrary frequencies interpolated through the derived equations showed a high spatial correlation with the physics-based model results with R2= 0.9. By integrating discrete scenario maps through this interpolation scheme, the proposed method enables rapid flood prediction without the need for repetitive numerical simulations. This approach is expected to significantly enhance the capability for immediate decision-making and response against sudden urban flood disasters.
Urban pluvial flood analysis requires spatial inundation information within operationally useful computation times. This study develops a graphics processing unit (GPU)-accelerated Node–Edge Urban Flood Model (GNE-UFM) that couples SWMM-style runoff generation, structured-grid surface flow, a typed sewer graph, and conservative surface–sewer exchange. The model was evaluated in the Sillim drainage district using the August 2022 observed event and three one-hour rainfall scenarios of 40, 90, and 150 mm, with inputs and output thresholds matched to InfoWorks ICM. For the synthetic scenarios, GNE-UFM achieved CSI values of 0.878–0.904 and wet-union RMSE values of 0.050–0.078 m, while full coupled GPU runs closed the effective runoff mass balance with absolute residuals no larger than 0.0284%. Runtime was comparable to ICM for the lowest-intensity case and became more efficient for the 90 and 150 mm cases, with GNE-UFM maintaining nearly constant RTR as rainfall intensity and inundated area increased.