Soft magnetic actuators have gained significant interest for applications in minimally invasive medical robots, artificial muscles, soft robotic manipulators, and wearable bioelectronic interfaces, yet their functionality remains fundamentally limited by current magnetization strategies. To this end, a novel in‐process printing and magnetization strategy with spatial and dynamic control of an external magnetic field during printing is developed to fabricate magnetorheological elastomers with fully customizable three‐dimensional (3D) magnetization profiles. This method allows localized magnetic domain alignment in arbitrarily programmed orientations within a solid, enabling anisotropic actuation at micron to millimeter scales. The proposed method is highly sensitive to curing kinetics, material viscosity, and magnet positioning, which are characterized theoretically, experimentally, and in simulation. Structures magnetized in this way offer robust strain‐sensing, information‐encoding, and bio‐inspired heterogeneous actuation capabilities. Demonstrations highlight this versatility, including a dragonfly with oppositely magnetized wings for tunable resonant actuation, an octopus‐inspired swimmer whose magnetized legs reproduce aquatic locomotion, and a serpentine catheter with high degrees of freedom across 6 magnetic nodes. Together, these advances establish a versatile platform for designing magnetically responsive systems that couple programmable anisotropic actuation with biological complexity.
Peeling behavior of soft materials is important in a wide range of applications, e.g., electronics, healthcare, etc. When applied on soft substrates, soft adhesives demonstrate unique mechanical behaviors compared to adhesives applied on rigid substrates. Adhesive properties can be conveniently measured by “peel testing”. The focus of this work is characterization of commercial glues on fabric substrates using commonly used peel tests. We investigate energy dissipation on textile substrates. For practical applications, we aim to develop a systematic approach for selecting adhesives for soft, flexible substrates. Here, we developed a multi-criteria framework for evaluating adhesives using data from peel tests. The criteria used here consider the shape and stability of the T-peel trace. The results of the multi-criteria evaluation were compared to traditionally used peel strength and fracture energy. Although E6000 produced the highest peel force () and the largest apparent fracture energy, (), it showed large force oscillation (). Fabri-Fuse was selected based on its low oscillation (), lowest (4.0%), high peel stability index (PSI), and high displacement at break. Functional evaluation showed that Fabri-Fuse increased strain-to-electrical-failure to higher than direct printing on fabric or printing on E6000 (highest peel strength). These results suggest that metrics that consider the shape of the peel trace and inter-sample repeatability provide a useful alternative for selecting adhesives other than highest peel strength.