This paper performs a techno-economic assessment in deploying solar photovoltaics to provide energy to a refrigeration machine for a remote underground mine. As shallow deposits are rapidly depleting, underground mines are growing deeper to reach resources situated at greater depths. This creates an immense challenge in air-conditioning as the heat emissions to mine ambient increases substantially as mines reach to deeper levels. A system-level design analysis is performed to couple PV with a refrigeration plant capable of generating 200 tonne of ice per day to help to mitigate this issue. Generated ice can directly be used in cooling deep underground mines via different types of direct heat exchangers. State-of-the-art technology is used in developing the model which aims to decrease the size and cost of a conventional refrigeration system run on a diesel generator. Costs associated with deploying a solar system are computed as per the recent market value. Energy savings, carbon emissions reduction, and net annual savings in employing the system are quantified and compared to a diesel-only scenario. In addition, two different energy storage strategies: an ice storage system and a battery storage system, are compared. A detailed economic analysis is performed over the life of the project to obtain the net cash flow diagram, payback period, and cumulative savings for both systems. Moreover, a sensitivity analysis is proposed to highlight the effect of solar intensity on solar system size and the area required for installment. The study suggests that the use of solar PV in mine refrigeration applications is technically feasible and economically viable depending on the sun-peak hours of the mine location. Additionally, the economics of deploying an ice storage system compared to the battery storage system has a better payback period and more cumulative savings.

Remote communities that have limited or no access to the power grid commonly employ diesel generators for communal electricity provision. Nearly 65% of the overall thermal energy input of diesel generators is wasted through exhaust and other mechanical components such as water-jackets, intercoolers, aftercoolers, and friction. If recovered, this waste heat could help address the energy demands of such communities. A viable solution would be to recover this heat and use it for direct heating applications, as conversion to mechanical power comes with significant efficiency losses. Despite a few examples of waste heat recovery from water-jackets during winter, this valuable thermal energy is often discarded into the atmosphere during the summer season. However, seasonal thermal energy storage techniques can mitigate this issue with reliable performance. Storing the recovered heat from diesel generators during low heat demand periods and reusing it when the demand peaks can be a promising alternative. At this point, seasonal thermal storage in shallow geothermal reserves can be an economically feasible method. This paper proposes the novel concept of coupling the heat recovery unit of diesel generators to a borehole seasonal thermal storage system to store discarded heat during summer and provide upgraded heat when required during the winter season on a cold, remote Canadian community. The performance of the proposed ground-coupled thermal storage system is investigated by developing a Computational Fluid Dynamics and Heat Transfer model.

Subsurface mining operations are continuously getting deeper and more complex due to depletion of shallow deposits. This fact inevitably brings more expensive, high-tech oriented and most importantly energy intensive subsurface mining operations to come alive. Accordingly, while big mining companies are developing sensible extraction methods to exploit orebodies located at great depths, they are also seeking to cut down their costs and carbon footprint. A large percentage of the energy needed by a subsurface mine is due to the mine ventilation and air conditioning reasons. In fact, for mines deeper than 2 km, mine air conditioning becomes a must. Yet, as there are not many alternatives developed, most of the modern mines are subjected to deploy tens of megawatts worth of cooling plants using massive refrigeration units. This does not only create a large financial burden during the project stage but also results in heavy energy demands during the operation. This paper aims to investigate a natural, alternative deep-mine lake cooling system by providing a detailed ‘front-end-loading’ design conducted for a real-life, Canadian example.