Lingsheng Yang

Dr. Lingsheng Yang


Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 April 2019 in IEEE Access
Verified
Journal Article
Open access
YLY. J. Li
Y. J. Li
ZLZ. Y. Lu
Z. Y. Lu
LYLingsheng Yang
Lingsheng Yang
In this paper, a flexible antenna with simple structure, small size ( 15mm×17mm×1mm ) and light weight for medical wearable applications is proposed. The antenna consists of slot radiation elements fed by a coplanar waveguide (CPW) structure, and a floating ground. Flexible conductive cloth MKKTN260 is used to fabricate the antenna, while felt with good insulation is used as the substrate. The measured impedance matching bandwidth ( |S11| less than -10dB) of the antenna is from 5.578 to 5.898GHz, which can cover the whole ISM 5.8GHz band (5.725-5.825GHz) and perform good wearable radiation characteristics. The floating ground structure and the interaction between slots make the antenna radiated efficiently (the measured peak realized gain is 4.85dBi at 5.8GHz) to the +Z direction , which is away from the human body. Meanwhile, without any specially designed reflecting structures, the specific absorption rate (SAR) value is below the criterion set by the FCC and ICNIPR. The bending configurations are also studied for this antenna.

1 March 2015 in Electronics Letters
Verified
Journal Article
Open access
PDF file
LYLingsheng Yang
Lingsheng Yang
TLTao Li
Tao Li
A multiple‐input–multiple‐output (MIMO) antenna system for mobile handsets is presented. The proposed MIMO system consists of four identical box‐folded planar inverted‐F antenna. A broad operating band (1.84–2.69 GHz) with overall MIMO system dimensions of 136 × 68.8 × 6 mm 3 and an element size of only 10 × 10 × 5 mm 3 can be achieved. Lower than −14.2 dB isolation between any two of the elements has been obtained at the whole operating band. The correlation coefficient, radiation pattern and antenna gain are also studied.

1 January 2015 in International Journal of Antennas and Propagation
Verified
Journal Article
Open access
PDF file
LYLingsheng Yang
Lingsheng Yang
TLTao Li
Tao Li
SYSu Yan
Su Yan
Planar monopole antenna is proposed as the antenna element to form a compact dual-element multiple-input-multiple-output (MIMO) antenna system for LTE2300 (used in Asia and Africa) and ISM band operation. The system can cover a 310 MHz (2.20–2.51 GHz) operating bandwidth, with the total size of 15.5 mm × 18 mm × 1.6 mm. Measured isolation higher than 16 dB is obtained without any specially designed decoupling structures, while the edge-to-edge element spacing is only 7.8 mm (0.08λat 2.20 GHz). Radiation characteristics, correlation coefficient, and the performance of the whole system with a metal sheet and a plastic housing show this system is competitive for practical MIMO applications. The antenna element is further used to build an eight-element MIMO antenna system; also good results are achieved.

25 December 2019 in IEEE Access
Verified
Journal Article
Open access
LYLingsheng Yang
Lingsheng Yang
DZDan Zhang
Dan Zhang
XZXiaolei Zhu
Xiaolei Zhu
YLYajie Li
Yajie Li
A compact Super Wide band (SWB) antenna fed by coplanar waveguide (CPW) is proposed in this paper. The size of the antenna is 140×100mm2 (0.16λ × 0.12λ). The antenna originates from 3D volcano smoke antenna, and consists of a prolonged radiation patch and a symmetrical ground. Both the patch and ground were designed as smoothing structure, which can improve the impedance matching through a wide band. The simulated and measured bandwidth show that the antenna has a well-matched impedance bandwidth from 400MHz to higher than 20GHz under VSWR=2 criterion, and the bandwidth ratio is greater than 50:1. The gain, efficiency and radiation pattern were all measured, and the maximum gain and efficiency are 6.3dBi and 96%, respectively. The antenna was also used to measure the ambient radiation frequency (RF) density in an urban area of Nanjing in China, which on the other hand proves the efficiency of this design.

1 July 2023 in Chinese Journal of Electronics
Verified
Journal Article
Closed access
LYLingsheng Yang
Lingsheng Yang
YXYizhang Xie
Yizhang Xie
HJHongting Jia
Hongting Jia
MQMeixuan Qu
Meixuan Qu
ZLZhengyan Lu
Zhengyan Lu
YLYajie Li
Yajie Li
A two-element dual-band flexible multiin multi-out antenna which can be used for wearable applications is proposed in this paper. The antenna consists of two radiating elements fed by coplanar waveguide, and a shielding layer, which are all made of flexible conductive cloth MKKTN260. Each radiating element is composed of two coupled split ring-shaped bending strips. The proposed antenna shows two measured impedance band-width ( $S$ 11 <-10 dB) of 2.39-2.48 GHz and 5.72-5.88 GHz, so that it can be used for 2.4 GHz and 5.8 GHz ISM (industrial scientific medical) applications. The two coupled split rings form a self-isolation enhancement structure and can realize polarization diversity at 2.4 GHz band and radiation shielding at 5.8 GHz band, respectively. High isolation (>30 dB) has been achieved for both the bands. Other characteristics for wearable applications like gain, efficiency, specific absorption rate, and bending performances were also studied.

30 March 2020 in IEEE Access
Verified
Journal Article
Open access
LYLingsheng Yang
Lingsheng Yang
ZXZiling Xing
Ziling Xing
SXShihao Xu
Shihao Xu
DZDan Zhang
Dan Zhang
YLYajie Li
Yajie Li
In this article, a 3D top-loaded low profile sleeve antenna for unmanned aerial vehicle (UAV) applications is proposed. By loading a 3D disc cone structure on the top of a sleeve antenna, the overall height of the antenna can be significantly reduced compared with the height of a traditional quarter-wavelength monopole antenna. In addition, adding shorted columns between the top plate of the disc cone and the ground can generate a new resonant point at lower frequency, so that the frequency bandwidth can be effectively extended. Finally, in order to further achieve the miniaturization of the antenna, an annular slot ring structure was etched on the upper surface of the top plate. Under the conditions of S11 <-10dB, the designed antenna with a total size of 160mm × 160mm × 26.6mm ( 0.44λ×0.44λ×0.07λ ) has a wide band covering from 840MHz to 1.69GHz (67.2%), while the height of the proposed antenna is only 0.07λ (where λ is the wavelength of the lowest frequency point). Moreover, omnidirectional radiation performances through the operating band can be achieved for both the measured and simulated results.