Roberto Teti

Prof. Dr. Roberto Teti

Fraunhofer Joint Laboratory of Excellence on Advanced Production Technology (Fh J_LEAPT Naples), Department of Chemical, Materials and Industrial Production Engineering, University of Naples Federico II, P.le Tecchio 80, 80125 Naples, Italy

Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 January 2020 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Roberto TetiRoberto Teti
Roberto Teti
Tiziana SegretoTiziana Segreto
Tiziana Segreto
Alessandra CaggianoAlessandra Caggiano
Alessandra Caggiano
Luigi NeleLuigi Nele
Luigi Nele
Composite material parts are typically laid out in near-net-shape, i.e., very close to the finished product configuration. However, further machining processes are often required to meet dimensional and tolerance requirements. Drilling, edge trimming and slotting are the main cutting processes employed for carbon fiber-reinforced plastic (CFRP) composite materials. In particular, drilling stands out as the most widespread machining process of CFRP composite parts, chiefly in the aerospace industrial sector, due to the extensive use of mechanical joints, such as rivets, rather than welded or bonded joints. However, CFRP drilling is markedly challenging: due to CFRP abrasiveness, inhomogeneity and anisotropic properties, tool wear rates are inherently high leading to superior cutting forces and detrimental effects on workpiece surface quality and material integrity. Damage such as delamination, cracks or matrix thermal degradation is often observed as the result of uncontrolled tool wear or improper machining conditions. Sensor monitoring of drilling operations is, therefore, highly desirable for process conditions’ optimization and tool life maximization. The development of this kind of automated control technologies for process and tool state evaluation can notably contribute to the reduction of scraps and tool costs as well as to the improvement of process productivity in the drilling of CFRP composite material parts. In this paper, multi-sensor process monitoring based on thrust force and torque signal detection and analysis was applied during drilling of CFRP/CFRP laminate stacks for the assembly of aircraft fuselage panels with the scope to evaluate the tool wear state. Different signal-processing methods were utilised to extract diverse types of features from the detected sensor signals. A machine-learning approach based on an artificial neural network (ANN) was implemented to make smart decisions on the timely execution of tool change, which is highly functional for CFRP drilling process automation.

15 August 2018 in Materials
Verified
Journal Article
Open access
PDF file
BABeatriz De Agustina
Beatriz De Agustina
MMMarta Mª Marín Martín
Marta Mª Marín Martín
Roberto TetiRoberto Teti
Roberto Teti
EREva M. Rubio
Eva M. Rubio
In this study feature extraction of force signals detected during robot-assisted polishing processes was carried out to estimate the surface roughness during the process. The purpose was to collect significant features from the signal that allow the determination of the end point of the polishing process based on surface roughness. For this objective, dry polishing turning tests were performed on a Robot-Assisted Polishing (RAP) machine (STRECON NanoRAP 200) during three polishing sessions, using the same polishing conditions. Along the tests, force signals were acquired and offline surface roughness measurements were taken at the end of each polishing session. As a main conclusion, it can be affirmed, regarding the force signal, that features extracted from both time and frequency domains are valuable data for the estimation of surface roughness.

16 December 2018 in Sensors
Verified
Journal Article
Open access
PDF file
Pedro Oliveira Conceição JuniorPedro Oliveira Conceição Junior
Pedro Oliveira Conceição Junior
Doriana Marilena D'AddonaDoriana Marilena D'Addona
Doriana Marilena D'Addona
PAPaulo Roberto Aguiar
Paulo Roberto Aguiar
Roberto TetiRoberto Teti
Roberto Teti
This paper presents an approach for impedance-based sensor monitoring of dressing tool condition in grinding by using the electromechanical impedance (EMI) technique. This method was introduced in Part 1 of this work and the purpose of this paper (Part 2) is to achieve an optimal selection of the excitation frequency band based on multi-layer neural networks (MLNN) and k-nearest neighbor classifier (k-NN). The proposed approach was validated on the basis of dressing tool condition information obtained from the monitoring of experimental dressing tests with two industrial stationary single-point dressing tools. Moreover, representative damage indices for diverse damage cases, obtained from impedance signatures at different frequency bands, were taken into account for MLNN data processing. The intelligent system was able to select the most damage-sensitive features based on optimal frequency band. The best models showed a general overall error lower than 2%, thus robustly contributing to the efficient automation of grinding and dressing operations. The promising results of this study foster the EMI-based sensor monitoring approach to fault diagnosis in dressing operations and its effective implementation for industrial grinding process automation.

12 December 2017 in Sensors
Verified
Journal Article
Open access
PDF file
Tiziana SegretoTiziana Segreto
Tiziana Segreto
Alessandra CaggianoAlessandra Caggiano
Alessandra Caggiano
SKSara Karam
Sara Karam
Roberto TetiRoberto Teti
Roberto Teti
Nickel-Titanium (Ni-Ti) alloys are very difficult-to-machine materials causing notable manufacturing problems due to their unique mechanical properties, including superelasticity, high ductility, and severe strain-hardening. In this framework, the aim of this paper is to assess the machinability of Ni-Ti alloys with reference to turning processes in order to realize a reliable and robust in-process identification of machinability conditions. An on-line sensor monitoring procedure based on the acquisition of vibration signals was implemented during the experimental turning tests. The detected vibration sensorial data were processed through an advanced signal processing method in time-frequency domain based on wavelet packet transform (WPT). The extracted sensorial features were used to construct WPT pattern feature vectors to send as input to suitably configured neural networks (NNs) for cognitive pattern recognition in order to evaluate the correlation between input sensorial information and output machinability conditions.

14 November 2014 in Sensors
Verified
Journal Article
Open access
PDF file
BABeatriz De Agustina
Beatriz De Agustina
MMMarta Mª Marín Martín
Marta Mª Marín Martín
Roberto TetiRoberto Teti
Roberto Teti
EREva M. Rubio
Eva M. Rubio
The polishing process is the most common technology used in applications where a high level of surface quality is demanded. The automation of polishing processes is especially difficult due to the high level of skill and dexterity that is required. Much of this difficulty arises because of the lack of reliable data on the effect of the polishing parameters on the resulting surface roughness. An experimental study was developed to evaluate the surface roughness obtained during Robot Assisted Polishing processes by the analysis of acoustic emission signals in the frequency domain. The aim is to find out a trend of a feature or features calculated from the acoustic emission signals detected along the process. Such an evaluation was made with the objective of collecting valuable information for the establishment of the end point detection of polishing process. As a main conclusion, it can be affirmed that acoustic emission (AE) signals can be considered useful to monitor the polishing process state.

16 December 2018 in Sensors
Verified
Journal Article
Open access
PDF file
Pedro Oliveira Conceição JuniorPedro Oliveira Conceição Junior
Pedro Oliveira Conceição Junior
Doriana Marilena D'AddonaDoriana Marilena D'Addona
Doriana Marilena D'Addona
PAPaulo Roberto Aguiar
Paulo Roberto Aguiar
Roberto TetiRoberto Teti
Roberto Teti
Low-cost piezoelectric lead zirconate titanate (PZT) diaphragm transducers have attracted increasing attention as effective sensing devices, based on the electromechanical impedance (EMI) principle, for applications in many engineering sectors. Due to the considerable potential of PZT diaphragm transducers in terms of excellent electromechanical coupling properties, low implementation cost and wide-band frequency response, this technique provides a new alternative approach for tool condition monitoring in grinding processes competing with the conventional and expensive indirect sensor monitoring methods. This paper aims at assessing the structural changes caused by wear in single-point dressers during their lifetime, in order to ensure the reliable monitoring of the tool condition during dressing operations. Experimental dressing tests were conducted on aluminum oxide grinding wheels, which are highly relevant for industrial grinding processes. From the results obtained, it was verified that the dresser tip diamond material and the position of the PZT diaphragm transducer mounted on the dressing tool holder have a significant effect on the sensitivity of damage detection. This paper contributes to the realization of an effective monitoring system of dressing operations capable to avoid catastrophic tool failures as the proposed sensing approach can identify different stages of the dressing tool lifetime based on representative damage indices.