Wei Shuai

Wei Shuai


Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 July 2026 in Buildings
Verified
Journal Article
Open access
PDF file
JWJie Wang
Jie Wang
Sheng QiangSheng Qiang
Sheng Qiang
LHLurong He
Lurong He
WCWeijie Chen
Weijie Chen
TJTONG jianli
TONG jianli
WSWei Shuai
Wei Shuai
Concrete placing surface flatness is an important quality indicator affecting thickness control, finishing efficiency, and subsequent construction quality. Although point-cloud-based flatness inspection has been widely studied for completed floors, walls, slabs, and precast components, near-real-time detection of small local unevenness on temporary concrete placing surfaces during construction remains insufficiently investigated, especially under the effects of point-cloud noise, local slope, incomplete coverage, and baseline false alarms. To address this gap, this study proposes a LiDAR-based automatic workflow that combines multi-frame median fusion, local reference-plane fitting, threshold-based deviation judgment, and visualized output. Indoor validation was conducted using an empty-ground baseline, 20 cm × 20 cm square plates, and 50 cm × 5 cm strip plates with thicknesses of 3, 5, and 10 mm. The average over-limit point ratio was 2.165% ± 0.192% for the empty-ground baseline. For 3, 5, and 10 mm square plates, the ratios were 2.536% ± 0.370%, 3.811% ± 0.638%, and 4.657% ± 0.850%, respectively; for strip plates, they were 2.269% ± 0.059%, 2.937% ± 0.443%, and 3.347% ± 0.435%, respectively. Compared with the baseline, the 5 and 10 mm square plates increased the ratio by 1.646 and 2.492 percentage points, while the 5 and 10 mm strip plates increased it by 0.772 and 1.182 percentage points. These results show that the workflow provides a clear thickness-dependent response for square targets and a detectable but weaker response for narrow strip targets. Scientifically, the study demonstrates how local threshold-scale unevenness can be distinguished from baseline point-cloud fluctuations. In application, it provides preliminary perception support for future online flatness inspection and automatic screeding assistance.

7 August 2025 in Water
Verified
Journal Article
Open access
PDF file
HGHaijing Gao
Haijing Gao
JCJingyuan Cui
Jingyuan Cui
QWQingpeng Wu
Qingpeng Wu
YLYan Li
Yan Li
WSWei Shuai
Wei Shuai
JMJinke Mao
Jinke Mao
To enhance regional flood control capacity, this study focused on the DX River section in Zhejiang Province. Unmanned vessel bathymetry was employed to obtain precise river cross-section data. A hydrodynamic model was established to simulate flood propagation processes and conduct flood routing analyses. Flood scenarios under 5-year, 10-year, and 20-year return periods were simulated to assess water level variations and overflow risks. The results indicate that under a 5-year flood, 19.5% of the right bank fails to meet flood control standards. This risk intensifies significantly with increasing return periods. Building on these findings, a flood optimal operation model was developed. The resulting coordinated strategy, which lowers the peak water level by 1.2 m during a 20-year flood, is sufficient to prevent overflow at the critical section and enhances regional flood control capacity. This is followed by dynamic gate regulation to match the outflow to the inflow. Dynamic regulation of spillway gates should then be implemented to achieve outflow rates commensurate with the incoming flood magnitude. This study demonstrates a robust workflow from high-resolution data acquisition to actionable operational rules, providing a transferable framework for mitigating flood risks in complex, regulated river systems.