Traditional ultra-thin asphalt wearing course designs often oversimplify wheel loads as uniform pressures, neglecting critical non-uniform effects. This study establishes a 3D finite element model incorporating realistic non-uniform tire loading to reveal its mechanistic influence on pavement responses. Results demonstrate that non-uniform loading significantly alters stress states in ultra-thin layers, substantially elevating critical stresses compared to uniform assumptions. A novel Non-uniform Load Influence Factor (NLIF) accounting for thickness effects is developed to quantify these deviations. The analysis provides a foundation for revising material strength specifications and fatigue design criteria, contributing to improved performance and durability of ultra-thin pavement systems.
Based on the static analysis of the original inertial point theory, this paper analysed the existence of the inertial point with double slab motion differential equations on the elastic half-space foundation under the moving load. At the same time, the effect laws of the vehicle speed, the pavement slab thickness, the Poisson’s ratio, the density and the moving load size on the inertial point of the flexible pavement on the elastic half-space foundation under the moving load were analysed. The result showed that there was the inertial point to the flexible pavement structure on the elastic half-space foundation under the moving load. And the vehicle speed and the pavement slab thickness had great impact on the inertial point. But the pavement Poisson’s ratio, density and the moving load size had minor or negligible impact on the inertial point. The analysis result of the inertial point existence under the moving load provided a basis for the pavement structure parameters back-calculation research of the inertial deflection method based on the moving load.
The objective of this study was to design mixtures that satisfy multiple performance criteria to build long-life pavement. A balanced mix design was employed to optimize AC-16, BBME-13, and EME-20 mixtures. The initial asphalt contents were determined using 4% air voids for the AC-16 mixture and the abundance coefficient K for BBME-13 and EME-20. Mixtures with two additional asphalt contents were also tested. A uniaxial penetration test, semi-circle bending test (to measure the flexibility index), and semi-circle bending test (to measure fracture energy) were used as performance tests. Then, a performance space diagram was created for a balanced analysis of the mixtures’ high-, intermediate-, and low-temperature performance. Finally, fatigue performance was verified. The results show that BMD could be used to evaluate different asphalt mixtures. The 20# BBME-13 (5.1%, 5.4%, and 5.7%), 50# BBME-13 5.4%, and 20# AC-16 4.7% mixtures had well-balanced performances and are recommended. The BBME-13 and EME-20 mixtures had higher fatigue lives and lower sensitivity to stress than the AC-16 mixture. For the BBME-13 and AC-16 mixtures, reducing the asphalt grade significantly increased fatigue life and decreased the sensitivity to stress. At a low stress ratio, the 20# EME-20 mixture had the best fatigue performance, whereas at a high stress ratio, the 20# BBME-13 mixture had the best fatigue performance.