This study investigated mushroom cultivation in controlled indoor environment. For this, the environmental factors including humidity and temperature were controlled by humidifier and ventilation. Four ventilations were installed on tops to bring the air from inside to outside and four small ventilations were installed on side wall along with black filter to bring the air from outside to inside. Four humidifiers were placed in four different positions inside the cultivation house. A single unit of humidifier was applied along with two top ventilations and two side ventilation to optimize the humidifying duration for 80 to 90% humidity. In this process 15 min humidifying duration was optimized to retain 80 to 90% humidity. Then the four units of humidifier were applied for 15 min by one combined application and five individual applications to optimize the configuration to ensure the 80 to 90% humidity in the whole cultivation room with tolerable temperature. Finally, the individual application as 15 min interval period by following after every 15 min humidifying treatment from four different points had been optimized and applied for the cultivation of method. During cultivation 28.60±1.02°C temperature, 87.96±2.26% humidity, 0.035±.005% CO2 and 34.53±19.003 lux light intensity had recorded. The total 261.8 kg mushroom was harvested from the controlled cultivation system, a fairly good production of mushroom was harvested till 7 flushes within 3 months of cultivation. This method of humidifying optimization and configuration procedure may ensure the continuous mushroom production throughout the years. Key words: Indoor, cultivation, model, mushroom, environment, optimization.
26 March 2017 in Turkish Journal of Agriculture - Food Science and Technology
Pleurotus pulmonarius was cultivated in three different environmental conditions, in ambient indoor environment (System 1), in humidifying without ventilation (System 2) and in humidifying with ventilation (System 3) to analyse the major nutritional contents. Sawdust was the main substrate for all the cultivation systems. The lowest temperature and the highest optimal humidity were found in System 3. The temperature and humidity had shown statistically significant among the three cultivation Systems. The highest numbers of flushes was found both in System 2 and System 3 but System 1 was produced mushrooms till 3rd flush. About 29.5%, 28.3%, 28.5% protein; 59.0%, 55.8%, 54.3% carbohydrate and 3.8%, 3.5%, 3.3% lipid were found in System 1, System 2 and System 3 respectively. The protein, carbohydrate, and lipid contents were shown statistically insignificant among the cultivation systems. The highest value of protein, carbohydrate and lipid were found for the sample of 1st flush in all the cultivation systems but the values were started to decrease with the increased numbers of flushes significantly. So, this study shown that, although the environmental conditions of the three cultivation systems were varied significantly but the protein, carbohydrate and lipid contents were existed their normal values in all cases but the values were decreased by the increased numbers of flushes.
1 November 2017 in Indian Journal of Science and Technology
Objectives: The current study investigated the effects of different environmental conditions on mushrooms morphology, moisture contents and yields to find out the most efficient way for indoor cultivation with maximum yield and morphology. Methods/Statistical Analysis: In this study, Pleurotus pulmonarius was cultivated in ambient indoor environment without humidifying and ventilation (System 1), indoor humidifying environment without ventilation (System 2) and indoor humidifying environment with ventilation (System 3). Findings: The highest humidity 90% was recorded both in System 2 and System 3 but the lowest temperature 26.50C was only recorded in System 3 whereas the lowest humidity 41% and highest temperature 320C was recorded in System 1. The highest individual weight (202g), numbers of fruitbodies (17), cap diameter (15cm), stalk height (15cm), outstanding (39%) moisture containing fruitbodies and bio-efficiency (73.6%) was recorded in System3 which was significantly higher than System 1 and System 2. In System 2, the individual weight (120g), numbers of fruitbodies (13), cap diameter (9cm), stalk height (11cm), outstanding (19.1%) moisture containing fruitbodies and bio-efficiency (44.1%) was recorded which is significantly higher than System 1 but lower than System 3. The strongest correlation of individual weight was found with temperature, humidity, numbers of fruitbodies and moisture contents where the numbers of fruitbodies and moisture contents also had correlation with temperature and humidity. Application/Improvement: This study provides an evidence of significant differences among the cultivation systems where the morphology, quality and yields were started to increase as System 1˂ System 2˂ System 3. Therefore, the design of System 3 is an effective model and method to optimize and control the indoor environmental factors which is an alternative way for indoor mushroom cultivation with higher yield.
Background and Aims: Chromosomal nondisjunction is the primary etiology of Down syndrome; however, genetic variations, environmental causes, and maternal etiologies also contribute to a great extent. The objective of this review is to evaluate these multifaceted factors during pregnancy. Methods: A comprehensive review of the literature of research and epidemiology was performed to examine the environmental factors, genetic factors, and clinical variables that influence Down syndrome. The research concludes with a discussion of new prenatal testing methods, the danger presented by increased maternal age, and how such issues impact the affected families. Results: The genetic polymorphisms were associated with a higher rate of chromosomal nondisjunction, particularly in the genes for folate metabolism, including MTHFR, RFC1, and MTHFD. These factors like education level of the mother, income, and access to prenatal care can raise or lower Down syndrome. People born with problems, like heart problems or problems with their intestines, tend to have problems with their bodies and minds also. The article also mentions how hard it is for parents to deal with the emotional weight of having a prenatal diagnosis and how common this condition is in different racial and cultural groups. Conclusion: Down syndrome is still a complicated illness caused by genetics, the environment, and the mother. With enhanced prenatal screening to detect problems before birth, families still encounter moral and ethical dilemmas. We need to learn more through further research on genetic modifiers, how the environment affects them, and how they affect health in the long run. A deeper understanding of these concerns will make prenatal counseling more robust and more effective treatment procedures for individuals with Down syndrome.