Coalbed methane (CBM), recognized as a sustainable and environmentally friendly energy source, plays a crucial role in mitigating global climate change and advancing low-carbon energy solutions. However, the prevalence of low-permeability coal seams poses a significant challenge to effective CBM extraction. Improving coal permeability has emerged as a viable strategy to address the issue of low-permeability coal. Conventional CBM stimulation methods fall short in overcoming this obstacle. In contrast, the enhanced technique of CBM extraction by water-based ultrasonic cavitation holds great promise due to its use of high energy intensity, safety, and efficiency. Nevertheless, the inadequate theoretical framework for managing this technology impedes its widespread adoption for large-scale applications. This study investigated the impact of water-based ultrasonic cavitation treatment on coal’s properties and permeability through mechanical testing and permeability measurements conducted before and after treatment. This study also explored the process by which this technology, known as WUC-ECBM, improves coal’s mechanical properties and permeability. The findings suggest a potential stimulation technique (WUC-ECBM) for use in CBM extraction, and its physical mechanism.
Tectonic coal, an aggregate of coal particles formed by compacting pulverized coal, has been developed extensively in China. Currently, reconstituted coal specimens are widely adopted to investigate the mechanical properties of tectonic coal, but they have a low compaction degree compared to the tectonic coal in the field. Therefore, the current understanding of the mechanical properties of tectonic coal is not accurate. Herein, a new high–pressure–resistant mold was developed, and a heavy press was developed to prepare highly compacted reconstituted coal specimens. Based on the reconstituted coal specimens and the intact coal specimens obtained through coring, the mechanical properties of tectonic coal and intact coal were measured and compared systematically. The results show that the compaction degree of reconstituted coal specimen can be improved significantly by increasing the external force. For Sijiazhuang coal, the compaction degree of the reconstituted coal specimen almost reaches that of the tectonic coal in the field when the external force is increased to 550 KN. Moreover, the tectonic coal exhibits a low elastic modulus and low strength but high stress sensitivity. The elastic modulus and cohesion of tectonic coal are 22.08% and 43.47% of the corresponding values for intact coal. However, with the increase in the confining pressure from 5 to 20 MPa, the elastic modulus of tectonic coal increases by 1.14 times, while that of the intact coal increases just by 8.70%. In addition, tectonic coal and intact coal present different post-peak failure modes under the triaxial compression stress path. Typical shear failure occurs in the intact coal, while multiple shear failure occurs in the tectonic coal.
This study addresses the significant increase in gas content and gas pressure caused by the rising proportion of high gas, low-permeability coal seams under high geostress conditions. This problem not only limits the efficient extraction of coalbed methane (CBM) but also poses a serious threat to mining safety. To overcome this challenge, a novel water-based ultrasonic cavitation-enhanced coalbed methane recovery (WUC-ECBM) is proposed. A self-developed multimodal ultrasonic cavitation reaction system is used to treat coal samples at different cavitation power levels (0–1100 W). Mechanical tests are then performed, and the damage evolution process is synchronously characterised using a multichannel acoustic emission monitoring system. Permeability tests are also conducted to evaluate the effect of ultrasonic cavitation on coal seepage performance. The results show that ultrasonic cavitation systematically alters the mechanical behaviour of coal, driving the evolution from microstructural modification to macroscopic mechanical response. The compressive strength decreased by up to 53.71%, and the elastic modulus fell to 1.34 GPa, indicating a marked reduction in coal stiffness. The cumulative acoustic emission energy decreased to 0.77 × 106 mV·ms, demonstrating that ultrasonic cavitation promoted the initiation, propagation, and coalescence of internal microcracks, thereby accelerating damage evolution from microscale to macroscale. A progressive failure mechanism, characterised by primary cavitation-induced damage followed by secondary loading-induced damage, is ultimately formed. In addition, ultrasonic cavitation significantly enhanced coal permeability, with a maximum increase of 504.22%. These findings provide a theoretical basis for the further development of WUC-ECBM and for the efficient extraction of CBM.
The Taiyuan Formation limestone in the Ordos Basin of China holds significant gas-bearing potential, making it a key target for unconventional natural gas exploration. Clarifying the microscopic occurrence mechanism of gas in limestone is necessary. The effects of pore morphology, aperture, and formation water were systematically studied in this paper through MD and GCMC. The results indicate that specific surface area, pore volume, tortuosity, and interaction synergistically influence methane adsorption and diffusion. Pore shape is intricately linked to these factors, and variations in pore width impact pore volume and interaction, with a slit pore being most conducive to gas diffusion. Formation water mainly forms water films and clusters in organic–inorganic pores. Water molecules preferentially form a water film, while increasing moisture content, expanding aperture, and introducing ions promote cluster formation. Formation water can enhance surface diffusion, reduce the adsorbed phase proportion, and decrease interaction, but it also occupies flow space and forms clusters that hinder gas diffusion. At low moisture content, gas diffusion is promoted in 2 nm and 4 nm pores, while high moisture content inhibits it. In contrast, 6 nm pores consistently curb diffusion.