Hydrogenated two-dimensional (2D) Si nanosheet is a layered semiconductor synthesized by topotactic conversion of CaSi2 in HCl solution at low temperatures. The unavailability of scalable thin film deposition techniques has hindered the experimental analysis of physical properties. This study has investigated the synthesis of CaSi2 films by close-spaced evaporation and their topotactic conversion to 2D Si nanosheet films. A single-phase CaSi2 (6R) formation window was identified in the growth temperature range of 800–950 °C. Secondary phases (CaSi and Si polycrystals) formed outside the optimal window have also been identified. The x-ray pole figure of the representative CaSi2 film has shown that the film grows epitaxially with two epitaxial variants on the Si(111) surface with (0001) orientation. The CaSi2 films with and without the Si polycrystals have been subjected to low-temperature HCl solution treatment. Mostly hydrogenated 2D Si nanosheet films were synthesized without the Si polycrystals, while CaSi2 remained with the Si polycrystals, highlighting the importance of single-phase CaSi2 films.
Nano-beam electron diffraction (NBD) is a useful technique to study nanometer-order crystallographic structures. If we use a high-end TEM which has three or more condenser lenses, it is possible to take sharp diffraction patters from nanometer-order area. However, if we use an ordinary TEM which has two condenser lenses, it is quite difficult to take sharp diffraction patters from nanometer-order area. Therefore, the NBD using two condenser-lens TEM has not been a popular technique to evaluate lattice spacings. Recently, the authors reported experimental works to evaluate SiGe lattice spacings using NBD taken by two condenser-lens TEM [ 1, 2]. The motivation was simple; we considered that the precise measurement might be possible if we could find the center of the diffraction disks correctly. The subject of this study is to elucidate the best experimental condition using two condenser-lens TEM to evaluate the lattice spacings.