This paper addresses the joint limit avoidance problem in kinematic control of redundant manipulators. A kinematically redundant manipulator has more Degrees of Freedom (DOFs) than are required to perform a given task. An inverse kinematic problem for such a manipulator admits an infinite number of solutions. In its kinematic control, by utilizing the redundant DOFs of the solutions, we can compose a primary task in consideration of a constraint condition. We usually select one of the solutions by introducing a Performance Criterion Function (PCF). The PCF performs a secondary task that has no effect on a primary task. Thus, we can introduce, e.g., joint limit avoidance as a secondary task to the design of a PCF. However, it is hard to perform joint limit avoidance in the case where a joint behaves in the close vicinity of the limit. In this paper, we propose a new PCF for avoiding joint limits. The main feature of the function is to admit the joint range of motion maximally. We adopt the proposed function in the gradient projection method to obtain the redundancy resolution. The effectiveness of the function is demonstrated by both numerical and experimental results. The differences among the proposed and conventional functions are also discussed.
This paper addresses a strategy learning problem in the RoboCupSoccer Small Size League (SSL). We propose a novel method based on action sequences to cluster an opponent’s strategies online. Our proposed method is composed of the following three steps: (1) extracting typical actions from geometric data to make action sequences, (2) calculating the dissimilarity of the sequences, and (3) clustering the sequences by using the dissimilarity. This method can reduce the amount of data used in the clustering process; handling action sequences instead of geometric data as data-set makes it easier to search actions. As a result, the proposed clustering method is online feasible and also is applicable to countering an opponent’s strategy. The effectiveness of the proposed method was validated by experimental results.
The paper describes a way of visual tracking control for stereo vision robot in case that the target moves around fast. Both the target and the active camera move simultaneously during the tracking in this paper. There would be several causes of generating the tracking errors; the velocity and acceleration of the target, the computing time and accuracy of the image processing, the motion delay of the robot, and so on. The paper focuses to the affects of the high velocity and the varying acceleration of the moving target, and then two kinds of physical experiments have been examined; one is in the case of visual tracking for high speed target with constant acceleration, the other is in the case for middle speed rotating target with varying acceleration. In both experiments, good performance of the visual tracking control has been achieved with the stereo vision robot.
This paper proposes a motion planning algorithm for dynamic nonholonomic systems represented in a second-order chained form. The proposed approach focuses on the so-called holonomy resulting from a kind of motion that traverses a closed path in a reduced configuration space of the system. According to the author’s literature survey, control approaches that make explicit use of holonomy exist for kinematic nonholonomic systems but does not exist for dynamic nonholonomic systems. However, the second-order chained form system is controllable. Also, the structure of the second-order chained form system analogizes with the one of the first-order chained form for kinematic nonholonomic systems. These survey and perspectives brought a hypothesis that there exists a specific control strategy for extracting holonomy of the second-order chained form system to the author. To verify this hypothesis, this paper shows that the holonomy of the second-order chained form system can be extracted by combining two appropriate pairs of sinusoidal inputs. Then, based on such holonomy extraction, a motion planning algorithm is constructed. Furthermore, the effectiveness is demonstrated through some simulations including an application to an underactuated manipulator.
This paper addresses a motion planning problem of the second-order chained form system. The author presents a novel control approach based on switching a state. The second-order chained form system is composed of three subsystems including two double integrators and a nonlinear system. Switching a single state of the double integrators can modify the nature of the nonlinear system. Such state-switching and sinusoidal control construct the basis of the proposed control approach. The effectiveness is validated by a simulation result.