Bacteria-based self-healing concrete is a construction material used to repair cracks in concrete, in which the bacterial spores are immobilized by bacteria carriers. However, the currently available bacteria carriers are not always suitable due to a complicated procedure or high cost. To develop a more suitable bacteria carrier as well as improve the anti-crack capability of self-healing concrete, in this study we evaluate the feasibility of using rubber particles as a novel bacteria carrier in self-healing concrete. Two types of self-healing concrete are prepared with rubber particles of different sizes to quantify the crack-healing effect. In addition, the fluidity and mechanical properties of the self-healing rubber concrete are compared with those of plain concrete and normal rubber concrete. The experimental results show that the self-healing rubber concrete with a particle size of 1~3 mm has a better healing capacity than the self-healing rubber concrete with a particle size of 0.2~0.4 mm, and the width value of the completely healed crack is 0.86 mm. The self-healing rubber concrete has a higher slump than the plain concrete and normal rubber concrete. According to the strength tests, the compressive strengths of the self-healing rubber concrete are low early on but they exceed those of the corresponding normal rubber concrete at 28 days. Moreover, the self-healing rubber concrete has higher splitting tensile strengths than the plain concrete and a better anti-crack capability. The results of a comparison to the other two representative bacterial carriers indicate that rubber particles have potential to be a widely used bacteria carrier for practical engineering applications in self-healing concrete.

With the depletion of fossil energy, offshore wind power has become an irreplaceable energy source for most countries in the world. In recent years, offshore wind power generation has presented the gradual development trend of larger capacity, taller towers, and longer blades. The more flexible towers and blades have led to the structural operational safety of the offshore wind turbine (OWT) receiving increasing worldwide attention. From this perspective, health monitoring systems and operational safety evaluation techniques of the offshore wind turbine structure, including the monitoring system category, data acquisition and transmission, feature information extraction and identification, safety evaluation and reliability analysis, and the intelligent operation and maintenance, were systematically investigated and summarized in this paper. Furthermore, a review of the current status, advantages, disadvantages, and the future development trend of existing systems and techniques was also carried out. Particularly, the offshore wind power industry will continue to develop into deep ocean areas in the next 30 years in China. Practical and reliable health monitoring systems and safety evaluation techniques are increasingly critical for offshore wind farms. Simultaneously, they have great significance for strengthening operation management, making efficient decisions, and reducing failure risks, and are also the key link in ensuring safe energy compositions and achieving energy development targets in China. The aims of this article are to inform more scholars and experts about the status of the health monitoring and safety evaluation of the offshore wind turbine structure, and to contribute toward improving the efficiency of the corresponding systems and techniques.

Offshore wind turbine (OWT) structures are highly sensitive to complex ambient excitations, especially extreme winds. To mitigate the vibrations of OWT structures under windstorm or typhoon conditions, a new eddy current with tuned mass damper (EC-TMD) system that combines the advantages of the eddy current damper and the tuned mass damper is proposed to install at the top of them. In the present study, the electromagnetic theory is applied to estimate the damping feature of the eddy current within the EC-TMD system. Then, the effectiveness of the EC-TMD system for vibration mitigation is demonstrated by small-scale tests. Furthermore, the EC-TMD system is used to alleviate structural vibrations of the OWT supported by composite bucket foundations (CBF) under extreme winds at the Xiangshui Wind Farm of China. It is found that the damping of the EC-TMD system can be ideally treated as having linear viscous damping characteristics, which are influenced by the gaps between the permanent magnets and the conductive materials as well as the permanent magnet layouts. Meanwhile, the RMS values of displacements of the OWT structure can be mitigated by 16% to 28%, and the acceleration can also be reduced significantly. Therefore, the excellent vibration-reducing performance of the EC-TMD system is confirmed, which provides meaningful guidance for application in the practical engineering of OWTs.