Rafael Valotta Rodrigues

Dr. Rafael Valotta Rodrigues


Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 August 2023 in Wind Energy Science
Verified
Journal Article
Open access
PDF file
JQJulian Quick
Julian Quick
PRPierre-Elouan Rethore
Pierre-Elouan Rethore
MPMads Mølgaard Pedersen
Mads Mølgaard Pedersen
RRRafael Valotta Rodrigues
Rafael Valotta Rodrigues
MFMikkel Friis-Møller
Mikkel Friis-Møller
It is important to optimize wind turbine positions to mitigate potential wake losses. To perform this optimization, atmospheric conditions, such as the inflow speed and direction, are assigned probability distributions according to measured data, which are propagated through engineering wake models to estimate the annual energy production (AEP). This study presents stochastic gradient descent (SGD) for wind farm optimization, which is an approach that estimates the gradient of the AEP using Monte Carlo simulation, allowing for the consideration of an arbitrarily large number of atmospheric conditions. SGD is demonstrated using wind farms with square and circular boundaries, considering cases with 100, 144, 225, and 325 turbines, and the results are compared to a deterministic optimization approach. It is shown that SGD finds a larger optimal AEP in substantially less time than the deterministic counterpart as the number of wind turbines is increased.

7 February 2024 in Wind Energy Science
Verified
Journal Article
Open access
PDF file
RRRafael Valotta Rodrigues
Rafael Valotta Rodrigues
MPMads Mølgaard Pedersen
Mads Mølgaard Pedersen
JSJens Peter Schøler
Jens Peter Schøler
JQJulian Quick
Julian Quick
PRPierre-Elouan Réthoré
Pierre-Elouan Réthoré
As the use of wind energy expands worldwide, the wind energy industry is considering building larger clusters of turbines. Existing computational methods to design and optimize the layout of wind farms are well suited for medium-sized plants; however, these approaches need to be improved to ensure efficient scaling to large wind farms. This work investigates strategies for covering this gap, focusing on gradient-based (GB) approaches. We investigated the main bottlenecks of the problem, including the computational time per iteration, multi-start for GB optimization, and the number of iterations to achieve convergence. The open-source tools PyWake and TOPFARM were used to carry out the numerical experiments. The results show algorithmic differentiation (AD) as an effective strategy for reducing the time per iteration. The speedup reached by AD scales linearly with the number of wind turbines, reaching 75 times for a wind farm with 500 wind turbines. However, memory requirements may make AD unfeasible on personal computers or for larger farms. Moreover, flow case parallelization was found to reduce the time per iteration, but the speedup remains roughly constant with the number of wind turbines. Therefore, top-level parallelization of each multi-start was found to be a more efficient approach for GB optimization. The handling of spacing constraints was found to dominate the iteration time for large wind farms. In this study, we ran the optimizations without spacing constraints and observed that all wind turbines were separated by at least 1.4 D. The number of iterations until convergence was found to scale linearly with the number of wind turbines by a factor of 2.3, but further investigation is necessary for generalizations. Furthermore, we have found that initializing the layouts using a heuristic approach called Smart-Start (SMAST) significantly reduced the number of multi-starts during GB optimization. Running only one optimization for a wind farm with 279 turbines initialized with SMAST resulted in a higher final annual energy production (AEP) than 5000 optimizations initialized with random layouts. Finally, estimates for the total time reduction were made assuming that the trends found in this work for the time per iteration, number of iterations, and number of multi-starts hold for larger wind farms. One optimization of a wind farm with 500 wind turbines combining SMAST, AD, and flow case parallelization and without spacing constraints takes 15.6 h, whereas 5000 optimizations with random initial layouts, finite differences, spacing constraints, and top-level parallelization are expected to take around 300 years.

14 March 2024 in Wind Energy Science
Verified
Journal Article
Open access
PDF file
JRJavier Criado Risco
Javier Criado Risco
RRRafael Valotta Rodrigues
Rafael Valotta Rodrigues
MFMikkel Friis-Møller
Mikkel Friis-Møller
JQJulian Quick
Julian Quick
MPMads Mølgaard Pedersen
Mads Mølgaard Pedersen
PRPierre-Elouan Réthoré
Pierre-Elouan Réthoré
Wind farm layout optimization is usually subjected to boundary constraints of irregular shapes. The analytical expressions of these shapes are rarely available, and, consequently, it can be challenging to include them in the mathematical formulation of the problem. This paper presents a new methodology to integrate multiple disconnected and irregular domain boundaries in wind farm layout optimization problems. The method relies on the analytical gradients of the distances between wind turbine locations and boundaries, which are represented by polygons. This parameterized representation of boundary locations allows for a continuous optimization formulation. A limitation of the method, if combined with gradient-based solvers, is that wind turbines are placed within the nearest polygons when the optimization is started in order to satisfy the boundary constraints; thus the allocation of wind turbines per polygon is highly dependent on the initial guess. To overcome this and improve the quality of the solutions, two independent strategies are proposed. A case study is presented to demonstrate the applicability of the method and the proposed strategies. In this study, a wind farm layout is optimized in order to maximize the annual energy production (AEP) in a non-uniform wind resource site. The problem is constrained by the minimum distance between wind turbines and five irregular polygon boundaries, defined as inclusion zones. Initial guesses are used to instantiate the optimization problem, which is solved following three independent approaches: (1) a baseline approach that uses a gradient-based solver; (2) approach 1 combined with the relaxation of the boundaries, which allows for a better design space exploration; and (3) the application of a heuristic algorithm, “smart-start”, prior to the gradient-based optimization, improving the allocation of wind turbines within the inclusion polygons based on the potential wind resource and the available area. The results show that the relaxation of boundaries combined with a gradient-based solver achieves on average +10.2 % of AEP over the baseline, whilst the smart-start algorithm, combined with a gradient-based solver, finds on average +20.5 % of AEP with respect to the baseline and +9.4 % of AEP with respect to the relaxation strategy.

12 March 2019 in Energies
Verified
Journal Article
Open access
PDF file
RRRafael Valotta Rodrigues
Rafael Valotta Rodrigues
CLCorinne Lengsfeld
Corinne Lengsfeld
The first part of this work describes the validation of a wind turbine farm Computational Fluid Dynamics (CFD) simulation using literature velocity wake data from the MEXICO (Model Experiments in Controlled Conditions) experiment. The work is intended to establish a computational framework from which to investigate wind farm layout, seeking to validate the simulation and identify parameters influencing the wake. A CFD model was designed to mimic the MEXICO rotor experimental conditions and simulate new operating conditions with regards to tip speed ratio and pitch angle. The validation showed that the computational results qualitatively agree with the experimental data. Considering the designed tip speed ratio (TSR) of 6.6, the deficit of velocity in the wake remains at rate of approximately 15% of the free-stream velocity per rotor diameter regardless of the free-stream velocity applied. Moreover, analysis of a radial traverse right behind the rotor showed an increase of 20% in the velocity deficit as the TSR varied from TSR = 6 to TSR = 10, corresponding to an increase ratio of approximately 5% m·s−1 per dimensionless unit of TSR. We conclude that the near wake characteristics of a wind turbine are strongly influenced by the TSR and the pitch angle.

1 May 2022 in Journal of Physics: Conference Series
Verified
Conference Paper
Open access
PDF file
RRRafael Valotta Rodrigues
Rafael Valotta Rodrigues
MFMikkel Friis-Møller
Mikkel Friis-Møller
KDKatherine Dykes
Katherine Dykes
NPNicolò Pollini
Nicolò Pollini
MJMorten Jensen
Morten Jensen
The preliminary financial evaluation of wind farm profitability requires fast analysis of energy production and costs while having very little specific information around the project. Early in the design process, the selection of specific wind turbines and the layout design may not yet be defined. Techno-economic and financial analysis models have been developed to use input from a small set of high-level project characteristics to estimate major cost elements and energy production for a wind farm to support quick analysis of levelized cost of energy (LCoE), or other financial metrics. Such models are typically based on prior project data and/or very simple analytical models. However, as capabilities for financial analysis of wind farms advance, so does the desire to improve the accuracy of the physical and cost modelling of the system. In this work, we develop a surrogate model of Annual Energy Production (AEP) for offshore wind farms for financial analysis applications in the early stages of development. The surrogate is developed from an parameterized engineering model and covers a large potential wind farm design space addressing different technological and site conditions. The surrogate model uncovers the underlying structure in the model in terms of input-output relationships and achieves a coefficient of determination of 0.994. The method used to develop the surrogate model can be adapted for additional dimensions of inputs as needed.

6 April 2019 in Energies
Verified
Journal Article
Open access
PDF file
RRRafael Valotta Rodrigues
Rafael Valotta Rodrigues
CLCorinne Lengsfeld
Corinne Lengsfeld
The second part of this work describes a wind turbine Computational Fluid Dynamics (CFD) simulation capable of modeling wake effects. The work is intended to establish a computational framework from which to investigate wind farm layout. Following the first part of this work that described the near wake flow field, the physical domain of the validated model in the near wake was adapted and extended to include the far wake. Additionally, the numerical approach implemented allowed to efficiently model the effects of the wake interaction between rows in a wind farm with reduced computational costs. The influence of some wind farm design parameters on the wake development was assessed: Tip Speed Ratio (TSR), free-stream velocity, and pitch angle. The results showed that the velocity and turbulence intensity profiles in the far wake are dependent on the TSR. The wake profile did not present significant sensitivity to the pitch angle for values kept close to the designed condition. The capability of the proposed CFD model showed to be consistent when compared with field data and kinematical models results, presenting similar ranges of wake deficit. In conclusion, the computational models proposed in this work can be used to improve wind farm layout considering wake effects.