Climate change, population growth and rapid urbanisation have severe implications for cities and the way in which they interact with water. As a response to these challenges the water sensitive cities concept emerged, which supports cities to become more resilient to these challenges while making them more prosperous, sustainable and liveable. A water sensitive city harnesses the whole water cycle through integrated water management solutions, designs beautiful blue and green urban spaces and comprises healthy communities who are strongly connected with each other and with their local environment. Indonesian cities have an opportunity to 'leapfrog' towards a water sensitive city and to bypass the negative consequences that have resulted from urbanisation and growth that developed countries have gone through. Contributing to this growing field of research, this paper synthesizes key insights from the transformative change, sustainable urban water management and leapfrogging literature. The paper defines what leapfrogging to a water sensitive city means and describes three catalysts that facilitate this transition: trans-disciplinary science, cross sectoral collaboration and innovation experiments. The paper also introduces a joint Australian-Indonesian research program that develops water sensitive city leapfrogging strategies by translating these catalysts into practice.
1 December 2019 in International Journal on Advanced Science, Engineering and Information Technology
Landslide is one of the most dangerous hazards worldwide. It could be caused by several factors and could have a massive destructive impact on the environment. A landslide event occurred in one of the urban cities in Indonesia. In the middle of 2002, a landslide disaster due to rainfall occurred in the Ciliwung River’s floodplain, precisely in the South Jakarta area. The landslide profoundly affected large areas of the region and seriously injured many people. Several circumstances that could trigger landslide occurrences are the building load in the settlement area around the river, increase in the rainfall intensity, slope, and soil characteristics in the Ciliwung River area. This research proposes a combination of nonstructural and structural disaster mitigation methods for water-related landslide by investigating the safety factor (SF) of the river bank’s slope in one of the impacted sites, i.e., the area under the main bridge of Grand Depok City regency. This site is located in the boundary area between Depok City and South Jakarta. The authors simulate analytical and numerical modeling to estimate the SF of the slopes. This research concludes that the minimum SF in the analyzed location is recognized as a safety criterion for society. The condition becomes less secure when an earthquake occurs. Furthermore, high rainfall intensity could become the worst scenario that generates considerable damage. The proposed structural mitigation for river bank with anchor or snail increases the SF. However, this reinforcement program is not recommended because of its high cost and ineffectiveness in solving problems. Hence, green infrastructure (GI) is highly suggested for nature-based mitigation to prevent rainfall-triggered landslides in the Ciliwung River area. The authors conduct the preliminary design of the study and recommend further analysis of GI or soil bioengineering to ensure its effectiveness and applicability in the research area.
Seawater intrusion is one of groundwater quality problem which in this problem, the mixing between freshwater and saltwater in the coastal aquifer occurs. Mathematical modelling can be formulated to describe the mechanism of this phenomena. The main objective of this research is to develop the mathematical model of groundwater flow and solute transport that applicable to seawater intrusion mechanism. This mechanism is arranged as a differential equation and distinguished into 3 equations. The first equation is groundwater flow equation in dependent-density. It means that the density of groundwater (ρ) changes in spatial and temporal domain due freshwater and seawater are mixed in the coastal aquifer. The second equation is solute transport. Like as groundwater flow equation, in solute transport equation there is a change of solute concentration (С) in the spatial and temporal domain. The last equation is the relationship between groundwater density (ρ) and solute concentration (С). Special case for the third equation, in which this equation is adopted from USGS Seawat model. The first equation and second equation are governed by Eulerian mass conservation law. The main theoretical consideration of governing groundwater flow equation is such as fluid and porous matrix compressibility theory, Darcy's law for groundwater in motion theory and some properties of soil. In other hands, solute transport is involving advection transport and hydrodynamic dispersion transport. Hydrodynamic dispersion is arranged by diffusion Fick's law and dispersion in porous media theory and it depends on transversal and longitudinal dispersivity. Using Jacob Bear's theory which states that fluid density as temperature, concentration and pressure function, authors obtain three primary variables in this model. Those variables follow fluid density (ρ), total head (h) and concentration (С). In this model, isotropic and isobar condition is considered, hence fluid density (ρ) is a function of concentration (С) only. Finally, from this research, authors wish this mathematical model is applicable to modelling, describing and predicting seawater intrusion phenomena theoretically.
Rapid urbanization in developing megacities has exacerbated hydrological imbalances, positioning urban flooding as a major environmental and socio-economic challenge of the twenty-first century. This study investigates the spatial relationship between building density, topography, and flood susceptibility in Jakarta, Indonesia—one of the most flood-prone urban regions globally. Employing geospatial analysis and spatial autocorrelation techniques, the research assesses how variations in land-use concentration and elevation influence the spatial clustering of flood vulnerability. The analytical framework integrates multiple spatial datasets, including Digital Elevation Models (DEMs), building footprint densities, and flood hazard maps, within a Geographic Information System (GIS) environment. Spatial statistical measures, specifically Moran’s I and Local Indicators of Spatial Association (LISA), are utilized to quantify and visualize patterns of flood susceptibility. The findings reveal that zones characterized by high building density and low elevation form statistically significant clusters of heightened flood risk, particularly within the southern and eastern subdistricts of Jakarta. The study concludes that incorporating spatially explicit and statistically rigorous methodologies enhances the accuracy of flood-risk assessments and supports evidence-based strategies for sustainable urban development and resilience planning.
30 November 2018 in International Journal of Engineering & Technology
Groundwater quality is one of water resource problem. This problem is driven by contaminant transport phenomena and can be described as a mathematical model. Contaminant transports equation usually is composed by advection and dispersion flux. In the porous medium or aquifer, contaminant meet tortuosity effect, therefore hydrodynamic dispersion must be considered as the development of dispersion flux. This paper explains the mathematical model of groundwater contaminant on fully saturated condition. It starts from governing equation of contaminant transport. Advection flux is based on groundwater velocity. In steady state condition, groundwater velocity can be determined as certain value. In another hand, in the transient condition, groundwater velocity must be determined based on the solution of groundwater flow model. Dispersion flux is calculated through first Fick’s law and this component is distinguished into two parts follow mechanical dispersion and molecular diffusion. Mechanical dispersion affected by groundwater velocity and dispersivity. Contaminant transport equation is solved numerically using Finite Difference Method (FDM). This final model is validated theoretically and then this model is simulated into transient condition. The result of the simulation is described and explained graphically. Based on this research, the result of FDM model has similar physical behavior to FEM model from CTRAN example.
Fluid flow through unsaturated soils is controlled by multiphase capillary and physicochemical sorptive forces that act over a range of scales from molecular to pore scale. Conventional numerical models lack the ability to uniformly model these multiscale interaction mechanisms, especially for partially saturated flows. This work develops a Pairwise Force Smoothed Particle Hydrodynamics (PF-SPH) formulation which couples capillary forces based on the Young–Laplace equation with physicochemical sorptive forces including van der Waals, hydration, osmotic and electrical double layer forces. A particle scale analogy method is presented to convert molecular scale sorptive forces to mesoscopic pairwise force interactions that are numerically compact and physically consistent within SPH. Open tube capillary rise experiment results are used to validate the proposed model and show successful reproduction of the measured saturation profile and active capillary height for 3.3 mm and 1.5 mm grains. Pore scale simulations are also conducted to compare soil-water interaction model with capillary forces only and with the addition of sorptive forces. Capillary forces alone produce symmetric pendular bridges between grains while the inclusion of sorptive forces generates water films coating on solid particle surfaces, a behavior that aligns with the widely accepted conceptual model of unsaturated soil-water retention. By accounting for sorptive forces, the flow model in unsaturated soil yields a more physically representative. The resulting framework is particularly relevant for flow dynamics in unsaturated zone where surface forces govern water retention and conventional capillary models fall short.