This paper reviews the work carried out under the European ACTS KEOPS (KEys to Optical Packet Switching) project, centering on the definition, development and assessment of optical packet switching and routing networks capable of providing transparency to the payload bit rate. The adopted approach uses optical packets of fixed duration with low bit rate headers to facilitate processing at the network/node interfaces. The paper concentrates on the networking concepts developed in the KEOPS project through a description of the implementation issues pertinent to optical packet switching nodes and network/node interfacing blocks, and consideration of the network functionalities provided within the optical packet layer. The implementation, from necessity, relies on advanced optoelectronic components specifically developed within the project, which are also briefly described.
In this work, a flexible and extensive digital platform for Smart Homes is presented, exploiting the most advanced technologies of the Internet of Things, such as Radio Frequency Identification, wearable electronics, Wireless Sensor Networks, and Artificial Intelligence. Thus, the main novelty of the paper is the system-level description of the platform flexibility allowing the interoperability of different smart devices. This research was developed within the framework of the operative project HABITAT (Home Assistance Based on the Internet of Things for the Autonomy of Everybody), aiming at developing smart devices to support elderly people both in their own houses and in retirement homes, and embedding them in everyday life objects, thus reducing the expenses for healthcare due to the lower need for personal assistance, and providing a better life quality to the elderly users.
Many innovative services are emerging based on the Internet of Things (IoT) technology, aiming at fostering better sustainability of our cities. New solutions integrating Information and Communications Technologies (ICTs) with sustainable transport media are encouraged by several public administrations in the so-called Smart City scenario, where heterogeneous users in city roads call for safer mobility. Among several possible applications, recently, there has been a lot of attention on the so-called Vulnerable Road Users (VRUs), such as pedestrians or bikers. They can be equipped with wearable sensors that are able to communicate their data through a chain of devices towards the cloud for agile and effective control of their mobility. This work describes a complete end-to-end IoT system implemented through the integration of different complementary technologies, whose main purpose is to monitor the information related to road users generated by wearable sensors. The system has been implemented using an ESP32 micro-controller connected to the sensors and communicating through a Bluetooth Low Energy (BLE) interface with an Android device, which is assumed to always be carried by any road user. Based on this, we use it as a gateway node, acting as a real-time asynchronous publisher of a Message Queue Telemetry Transport (MQTT) protocol chain. The MQTT broker is configured on a Raspberry PI device and collects sensor data to be sent to a web-based control panel that performs data monitoring and processing. All the architecture modules have been implemented through open-source technologies. The analysis of the BLE packet exchange has been carried out by resorting to the Wireshark packet analyzer. In addition, a feasibility analysis has been carried out by showing the capability of the proposed solution to show the values gathered through the sensors on a remote dashboard. The developed system is publicly available to allow the possible integration of other modules for additional Smart City services or extension to further ICT applications.
27 June 2019 in Journal of Optical Communications and Networking
Centralized radio access network (C-RAN) has been considered as an architectural solution able to reduce capital and operational expenditure in dense 5G cellular networks while allowing better network performance. The C-RAN approach decouples baseband units from antenna sites and places them in selected locations, connected by the so-called fronthaul links. These links require expensive high-capacity connections, thus calling for cost-efficient deployment. This paper presents a hybrid fronthaul solution for C-RAN based on both optical fibers and free-space optics (FSO) to enhance fronthaul flexibility and minimize deployment costs. Two design strategies based on integer linear programming are proposed for both greenfield and brownfield deployments. The first strategy is referred to as joint planning (JP) and is based on the joint minimization of the number of deployed remote radio heads (RRHs) and the cost of the hybrid fiber/FSO fronthaul. The second strategy is based on two-step disjoint planning (DP) that first identifies a cost-optimal RRH placement and then finds the corresponding minimum cost deployment for the fronthaul links. Results obtained with JP and DP are compared in dense urban area scenarios (i.e., with characteristics similar to festivals or concerts), highlighting the advantage of the JP approach compared to DP, both in terms of costs and an enhanced flexibility during the network design process.