Elvira Zhunussova

Dr. Elvira Zhunussova


Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 May 2025 in Molecules
Verified
Journal Article
Open access
PDF file
Anton MostovoyAnton Mostovoy
Anton Mostovoy
NENatalia Eremeeva
Natalia Eremeeva
ASAndrey Shcherbakov
Andrey Shcherbakov
MLMarina Lopukhova
Marina Lopukhova
SUSholpan Ussenkulova
Sholpan Ussenkulova
ABAmirbek Bekeshev
Amirbek Bekeshev
The possibility of using the secondary cellulose-containing raw material resource of the cereal production of buckwheat, namely, its husk, as sorbents for the collection of oil and oil products is shown. In order to increase the yield of the finished product, develop porosity, and improve the sorption characteristics of the buckwheat husk, methods for its physical and chemical modification are proposed. The effect of the modification modes on the parameters of the porous structure, as well as the sorption capacity of the developed materials for various types of oil products, was studied. The selection of the optimal parameters of the buckwheat husk modification was carried out, ensuring the production of effective unsinkable sorbents based on the buckwheat husk with a reserve buoyancy of more than 20 days and a high sorption capacity of sorbents for oil of up to 6.1 g/g and waste motor oil of up to 4.9 g/g. The use of the buckwheat husk as a sorbent allows not only the elimination of oil pollution on both water and surfaces but also solving the problem of the disposal of agricultural waste.

28 June 2026 in Polymers
Verified
Journal Article
Open access
PDF file
Anton MostovoyAnton Mostovoy
Anton Mostovoy
ASAndrey Shcherbakov
Andrey Shcherbakov
EZElvira Zhunussova
Elvira Zhunussova
ADAinura Duisenova
Ainura Duisenova
ABAmirbek Bekeshev
Amirbek Bekeshev
The growing volume of industrial waste and the need for sustainable material solutions drive the search for cost-effective fillers and energy-efficient processing methods for polymer composites. This study investigates the valorization of brick dust (BD), a fine ceramic waste, as a reinforcing filler for unsaturated polyester resin (UPR), combined with microwave (MW) treatment applied at different stages of composite fabrication. The brick dust was comprehensively characterized using laser diffraction, SEM, EDX, XRD, and FTIR, revealing an environmentally safe aluminosilicate powder with a mean particle size of 3–6 µm, plate-like morphology, and surface hydroxyl groups favorable for matrix interaction. The optimal filler content was found to be 50 phr, which increased flexural strength by 6.5%, flexural modulus by 134%, tensile strength by 11%, and impact strength by 40% compared to neat UPR. Among the MW strategies evaluated, post-curing of the fully polymerized composite for 120 s proved most effective, yielding further improvements in flexural strength (110 MPa, +34.1%), flexural modulus (8250 MPa, +49.7%), impact strength (13.8 kJ/m2, +119%), and Shore D hardness (88). MW post-curing also increased the gel fraction from 95.0% to 97.8%, raised the thermal stability index (THRI) from 150.6 to 165.8, and reduced equilibrium water absorption from 0.62% to 0.47% with a reversibility index of 87.5%. Fracture surface analysis confirmed a transition from interfacial debonding to cohesive matrix failure, with ultra-thin polymeric veils replicating the scaly filler structure. These results demonstrate that microwave post-curing synergistically enhances the mechanical, thermal, and moisture-resistant properties of brick dust-filled polyester composites.

30 June 2024 in Вестник КазУТБ
Verified
Journal Article
Open access
PDF file
NNNurgaliyev N.U. N.U.
Nurgaliyev N.U. N.U.
DAD.Zh. Amankeldin
D.Zh. Amankeldin
EZElvira Zhunussova
Elvira Zhunussova
KOKh.B. Omarov
Kh.B. Omarov
AZArai Zhumabekova Arai Arai Zhumabekova
Arai Zhumabekova Arai Arai Zhumabekova
OOO.R. Orynbassar
O.R. Orynbassar
The interest in this process lies in the fact that it has great value since low-octane components are used as raw materials - the n fraction. temperature – 62°С and catalytic reforming raffinates. This raw material contains mainly pentane and hexane fractions. This raw material, as well as fractions С5 and С6 obtained from a gas fractionation unit (GFU), and a central gas fractionation unit (CGFU), are isomerized in a hydrogen environment in the presence of a catalyst. Hydrocarbons with a relatively high octane number are obtained. When isomerizing the pentane fraction, a product with a higher octane number is obtained. Isomerization of n-pentane is of interest not only for the oil refining industry, but also for the petrochemical industry, since isopentane can be converted by dehydrogenation into isoprene, a raw material for rubber. The article conducted a study on the selection of the optimal catalyst for the light gasoline fraction isomerization unit located at the Atyrau Oil Refinery. The catalytic activity of the catalyst samples was assessed in a laboratory flow-type installation. Determination of the mass fraction of С2-С5 hydrocarbons in С5 hydrocarbon fractions (in raw materials and catalyst) was carried out by a method based on the separation of mixture components by gas-liquid chromatography. The components leaving the chromatographic column were detected using a thermal conductivity detector. The calculation of the mass fractions of components was carried out using the normalization method, taking into account correction factors. The minimum concentration of C2-С5 hydrocarbons, determined by the method used, is 0.01-0.05% wt.

11 September 2024 in Processes
Verified
Journal Article
Open access
PDF file
YSYerbol Shabanov
Yerbol Shabanov
YZYerlan Zhumagaliyev
Yerlan Zhumagaliyev
NNNurzhan Nurgali
Nurzhan Nurgali
MDMurat Dossekenov
Murat Dossekenov
KAKarlyga Almuratova
Karlyga Almuratova
EZElvira Zhunussova
Elvira Zhunussova
This study employs thermodynamic-diagram analysis to investigate component ratios within the Fe-Al-Si-Cr system, focusing on the behavior of homogeneous liquid states. Through comprehensive modeling, a phase diagram is constructed, elucidating the interplay of iron, aluminum, silicon, and chromium components. This study identifies stable elementary tetrahedra within the system, providing insights into phase compositions and distribution. Key findings reveal the significance of tetrahedral geometry in understanding and optimizing alloy compositions, particularly in the context of complex chromium alloys. This research underscores the utility of thermodynamic analysis in advancing our understanding of alloy systems and facilitating the optimization of production processes.