Xinhai Yu

Xinhai Yu


Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 February 2018 in RSC Advances
Verified
Journal Article
Open access
PDF file
FWFeng Wu
Feng Wu
PZPing Xing Zhou
Ping Xing Zhou
XYXinhai Yu
Xinhai Yu
A novel resin system was prepared using the glycidyl amide type multifunctional epoxy resin N,N,N′,N′-tetraglycidyl-4,4′-diaminodiphenylmethane (TGDDM) and latent curing agent dicyandiamide (DICY). The curing reaction mechanism of the TGDDM/DICY system was studied by Fourier transform infrared (FTIR) spectrometry and the non-isothermal cure behaviors of the mixture were investigated with differential scanning calorimetry (DSC) measurements. The FTIR results demonstrated that there were two main reactions occurring in the curing process of the TGDDM/DICY system. The DSC thermogram of the blend exhibited two different cure regimes in the temperature range of 140–358 °C, and the system experienced two autocatalytic curing processes with α = 0.45 as the boundary; the corresponding average activation energies calculated by the Kissinger method were 69.7 and 88.7 kJ mol−1, respectively. In addition, the correlation between activation energy Ea and fractional conversion α was determined by applying model-free isoconversional analysis with Flynn–Wall–Ozawa (FWO) and Starink methods. Results showed that both methods revealed similar trends and possessed approximately the same values at each fractional conversion. Activation energy varied greatly with fractional conversion and the possible causes behind the variations were analyzed in detail. The cured TGDDM/DICY exhibited outstanding mechanical and adhesive properties with tensile and shear strengths of 27.1 MPa at 25 °C and12.6 MPa at 200 °C, good dielectric properties with a low dielectric constant of 3.26 at 1000 kHz and a low water absorption of 0.41%.

19 July 2017 in RSC Advances
Verified
Journal Article
Open access
PDF file
FWFeng Wu
Feng Wu
PZPing Xing Zhou
Ping Xing Zhou
XYXinhai Yu
Xinhai Yu
A novel aromatic fluorinated tetramine, 2,2-bis[4-(2,4-diaminophenoxy)phenyl]hexafluoropropane (BDAPFP), was successfully synthesized. To maximize the advantages of the linear polyimides and hyperbranched polyimides, a series of novel star-branched fluorinated polyimides BPI-(1–3), which were derived from BDAPFP and anhydride-terminated linear poly(amide acid)s LPAA′-(1–3), were successfully synthesized. For comparison, a series of corresponding linear polyimides LPI-(1–3) were prepared from 4,4′-oxybisbenzenamine (ODA), p-phenylenediamine (PDA) and 3,3′,4,4′-biphenyltetracarboxylic dianhydride (BPDA) with various monomer ratios via the conventional two-step procedure with heating, imidization method. All the polyimides could form strong, flexible and transparent films with an UV-visible absorption cut-off wavelength at 366–398 nm. When compared with the linear polyimide films LPI-(1–3), the star-branched fluorinated polyimide films BPI-(1–3) not only possessed better thermal stability with glass transition temperatures of 283.0–318.0 °C and 5% weight loss temperatures of 544–578 °C and 500–560 °C in nitrogen and air, respectively, but also had improved mechanical properties with tensile strengths of 113–243 MPa, elongation at break of 9.44–9.70% and tensile modulus of 2.09–3.74 GPa. Moreover, the star-branched polyimide films BPI-(1–3) exhibited lower water absorptions of 0.35–0.52%, better dielectric properties with lower dielectric constants of 2.72–3.12 and lower dielectric losses of 0.0028–0.0040 at 1000 kHz.

27 November 2018 in Polymers
Verified
Journal Article
Open access
PDF file
QCQi Chen
Qi Chen
LDLiming Ding
Liming Ding
LWLihua Wang
Lihua Wang
HYHaijun Yang
Haijun Yang
XYXinhai Yu
Xinhai Yu
High proton selectivity is the ultimate aim for the ion exchange membranes (IEMs). In this study, two kinds of sulfonated polyimides (SPI)—non-fluorinated and fluorine-containing polyimide—with about 40% sulfonation degree were synthesized by one-step high temperature polymerization. High proton selectivity IEMs were prepared and applied in vanadium flow batteries (VFB). The chemical structures, physicochemical properties and single cell performance of these membranes were characterized. The results indicate that high molecular weight of SPIs can guarantee the simultaneous achievement of good mechanical and oxidative stability for IEMs. Meanwhile, the proton selectivity of SPI membrane is five times higher than that of Nafion115 membranes due to the introduction of fluorocarbon groups. Consequently, the single cell assembled with SPI membranes exhibits excellent energy efficiency up to 84.8% at a current density of 100 mA·cm−2, which is 4.6% higher than Nafion115. In addition, the capacity retention is great after 500 charge–discharge cycles. All results demonstrate that fluorinated SPI ion exchange membrane has a bright prospect in new energy field.

3 October 2018 in Journal of Wuhan University of Technology-Mater. Sci. Ed.
Verified
Journal Article
Closed access
PDF file
XYXinhai Yu
Xinhai Yu
SCShuo Chen
Shuo Chen
YXYongfen Xu
Yongfen Xu