Fire occurring in the chaparral behaves as a crown fire, a dual-layer fire that typically ignites in a dead surface fuel layer and transitions to an elevated live crown layer where it continues to spread. In chaparral fuels including chamise, a dominant species in southern California, flame transition to live crown fuels is associated with higher spread rates and greater fire intensity. Despite the relative importance of surface-to-crown transition and crown fire spread, most fire models represent chaparral fire as surface fire, therefore omitting key behavior processes driving this fire system. The purpose of this study was to characterize transition and spread behavior in chaparral fires modeled experimentally as crown fires. We examined heat release rate in the surface and crown fuel layers, time to transition, flame height, and rate of spread in wind-driven and nonwind-driven fires at two crown base heights. Our results showed that wind increased heat release rate, rate of spread, and flame height. A marked increase in heat release rate was observed in wind-driven fires, where adding wind produced an increase from 328 kW to 526 for a crown base height of 0.6 m and from 243 kW to 503 kW for a crown base height of 0.7 m. Further, crown base height served to decrease heat release rate and rate of spread for wind-driven and nonwind-driven fires.
Wind gusts are known to significantly influence wildfire behavior, yet their direct role in ignition dynamics remains underexplored in laboratory settings. This study investigates how controlled wind gusts affect ignition behavior, combustion transitions, and heat re-lease characteristics of wildland fuels using a bench-scale wind tunnel. Three fuel types, Excelsior, wild oat (Avena), and Wheatgrass were exposed to heated stainless-steel par-ticles under varying wind speeds (1.0 and 2.0 m/s) and gust frequencies (0.03, 0.05, and 0.07 Hz). Key ignition parameters, including ignition temperature, ignition delay, smol-dering-to-flaming (StF) transition, burnout time, and heat release rate (HRR), were measured and analyzed. The results show that increasing gust frequency consistently impacted ignition behavior which reduces ignition and transition times across all fuels while raising ignition temperatures and HRR. For instance, StF transition times in Avena dropped from 58 to 42 s and flaming ignition temperatures rose from ~415 °C to ~498 °C as gust frequency increased from 0.03 Hz to 0.07 Hz at 2.0 m/s wind speed. Also, for the same set of experiments, HRR rose from 1674 J/s to 2372 J/s with increasing gusts. These findings indicate that gusty winds enhance convective heat transfer and oxygen availability, accelerating fire initiation and intensifying combustion. The results offer valuable insights for improving predictive fire spread models, ignition risk assessments, and wildfire mitigation strategies under transient wind conditions.