An experimental study has been carried out to determine how inlet total-pressure distortion affects the performance of a micro gas turbine. An inlet simulator is designed and developed to produce and measure distortion patterns at the inlet to the gas turbine. An air jet distortion generator (AJDG) is used to produce nonuniform flow patterns and total pressure probes are installed to measure steady-state total-pressure distribution at the inlet. A set of wind tunnel tests have been performed to confirm the fidelity of distortion generator and measuring devices. Tests are carried out with the gas turbine exposed to inlet flow with 60 deg, 120 deg, and 180 deg circumferential distortion patterns with different distortion intensities. The performance of the gas turbine has been measured and compared with that of clean inlet flow case. Results indicate that the gas turbine performance can be affected significantly facing with intense inlet distortions.
Radial-inflow turbines (RI turbines) are critical components of air cycle machines (ACM), utilized in environment conditioning systems (ECS). In this work, a process is presented for the full design of a radial-inflow turbine, including volute, nozzle blade row and rotor blade row. The preliminary and detailed aerodynamic design approaches are explained in detail. A mean-line (1D) analysis method coupled with the preliminary design is employed to evaluate the aerodynamic performance of the RI turbine. Then, ANSYS CFX is used to perform unsteady 3D simulations of the designed RI turbine at design and off-design conditions to predict the aerodynamic performance of the turbine for future optimization.
The fidelity of the hybrid spectral-filtered density function (FDF) methods is assessed for large eddy simulation of turbulent scalar mixing. Both continuous and discontinuous spectral-element methods are considered on domains furnished by structured & unstructured grids. A parametric study is conducted of the effects of the spectral polynomial approximation ( ), the grid size ( ), and the LES filter width ( ). The simulated results are appraised via comparisons with high resolution direct numerical simulation (DNS) data. It is shown that the amount of energy resolved by LES depends on the magnitude of , but the total energy is predicted reasonably well for all values. Also, for a fixed filter width, the LES results converge to DNS data with both - refinements. At lower values, the rate of convergence to DNS is faster as increases. Within the range of parameters considered, provides the optimum LES resolution. The consistency of the hybrid spectral-FDF for LES of complex flows is demonstrated; warranting future applications of the methodology for combustion engineering.
2 July 2020 in International Journal of Computational Fluid Dynamics
A new computational methodology is developed for large eddy simulation (LES) of turbulent reacting flows using graphic processing units (GPUs). The LES is based on the filtered density function (FDF) of the scalar-composition in conjunction with a discontinuous Galerkin (DG) discretisation scheme on a structured rectangular mesh. This hybrid solver is developed in a manner suitable for GPU computing. The simulator, as devised, is shown to be of the order of 200 times faster than the serial CPU-based calculations; facilitating the use of FDF for practical applications. The consistency and the accuracy of the methodology are demonstrated by simulations of a temporally developing mixing layer, under both non-reacting and reacting conditions.
14 November 2022 in Combustion Theory and Modelling
A new computational methodology, termed ‘PeleLM-FDF’ is developed and utilised for high fidelity large eddy simulation (LES) of complex turbulent combustion systems. This methodology is constructed via a hybrid scheme combining the Eulerian PeleLM base flow solver with the Lagrangian Monte Carlo simulator of the filtered density function (FDF) for the subgrid scale reactive scalars. The resulting methodology is capable of simulating some of the most intricate physics of complex turbulence-combustion interactions. This is demonstrated by LES of a non-premixed CO/H temporally evolving jet flame. The chemistry is modelled via a skeletal kinetics model, and the results are appraised via a posteriori comparisons against direct numerical simulation (DNS) data of the same flame. Excellent agreements are observed for the time evolution of various statistics of the thermo-chemical quantities, including the manifolds of the multi-scalar mixing. The new methodology is capable of capturing the complex phenomena of flame-extinction and re-ignition at a 1/512 of the computational cost of the DNS. The high fidelity and the computational affordability of the new PeleLM-FDF solver warrants its consideration for LES of practical turbulent combustion systems.