Nurettin Gökhan Adar

Dr. Nurettin Gökhan Adar


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 June 2021 in Sakarya University Journal of Science
Verified
Journal Article
Closed access
NANurettin Gökhan Adar
Nurettin Gökhan Adar
Robotic arms are widely used in many industrial applications at present. The control of robotic arms involves position coordination Cartesian space by a forward/inverse kinematics solution method. The inverse kinematics is difficult for real-time control applications, computational requirements are intensive and the run-time is high. The traditional solution methods used geometric, algebraic, and numerical iterative techniques are inadequate and slow in the inverse kinematics solution. Recently, alternative solution methods based on artificial intelligence techniques have been developed to solve the inverse kinematics problem. In this study, a multi-layered feed-forward Artificial Neural Network model was developed to solve the inverse kinematics of the 5 degrees of freedom robotic arm. Using the Proportional-Integral control algorithm combined with this Artificial Neural Network model, the real-time position control of the robotic arm was accomplished. The obtained results were compared with the PI control supported by an analytical inverse kinematics solution in real-time. The results showed that the PI control combined with Artificial Neural Network has superior tracking ability, smaller control error, and better absolute fit to the reference.

30 September 2025 in Hittite Journal of Science and Engineering
Verified
Journal Article
Closed access
NANurettin Gökhan Adar
Nurettin Gökhan Adar
MÖMustafa Özden
Mustafa Özden
SCARA robots are widely used in industrial automation due to their high precision and speed, particularly in pick-and-place operations. In addition to conventional programming approaches, alternative vision-based control methods have gained interest to enhance flexibility and efficiency in robotic applications. This study presents the design and implementation of a Position-Based Visual Servoing (PBVS) for the SCARA robot system capable of detecting and manipulating objects in real-time. The proposed system consists of a fixed overhead camera, a SCARA robot, and Python-based control software. The software integrates image processing algorithms, kinematic calculations, and motor control, enabling the robot to autonomously identify objects, compute their positions, and execute pick and place tasks. To enhance object detection accuracy, Kuwahara filtering, Canny edge detection, morphological transformations, and connected component analysis were applied. Experimental results demonstrated that the combination of Kuwahara filtering and Canny edge detection achieved the lowest MSE error (8.45%), ensuring precise object localization. Furthermore, inverse kinematics was employed to generate accurate joint movements, allowing smooth and reliable grasping operations. The system was tested through 100 pick-and-place trials, achieving a 100% grasping success rate when Kuwahara filtering was applied. The experimental findings confirm that vision-based control significantly improves SCARA robot performance, making it suitable for automated assembly, material handling, and quality control applications.

24 December 2023 in Scientia Iranica
Verified
Journal Article
Open access
PDF file
ABAyberk Beyhan
Ayberk Beyhan
NANurettin Gökhan Adar
Nurettin Gökhan Adar
Robotic arms have become increasingly popular and widely used in various industrial applications. However, conventional control methods are not capable of adequately controlling a robotic arm in tasks that require contact with a surface. To address this issue, this study proposes a Cartesian impedance control method to control a 3-DOF robotic arm in real-time during contact with a surface. The proposed controller consists of two control loops: an inner loop and an outer loop. The inner loop utilizes a motion control method in the joint space, with the parameters of the controller being calculated through system identification. The outer loop implements Cartesian impedance control in the Cartesian space using a mass-spring-damper model. The coefficients of the Cartesian impedance control were determined based on the over-damped response with real-time applications. By selecting the inner loop in the joint space and the outer loop in the Cartesian space, the control of the robotic arm is guaranteed. The proposed method was tested in real-time, and its performance was compared with the PID with gravity compensation control in the Cartesian space. The results indicated that the proposed method was able to successfully follow reference trajectories and reduce the contact force.

3 July 2026 in Welding in the World
Verified
Journal Article
Closed access
PDF file
NANurettin Gökhan Adar
Nurettin Gökhan Adar
AYAli Yildiz
Ali Yildiz

7 May 2026 in Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi
Verified
Journal Article
Closed access
NANurettin Gökhan Adar
Nurettin Gökhan Adar
HÜHakan Ülker
Hakan Ülker
MÖMustafa Özden
Mustafa Özden
One-degree-of-freedom copters, capable of a single rotational motion, are widely used as preliminary platforms for testing control strategies of lightweight rotary-wing aircraft due to their simplicity and low cost. In this study, the dynamic model of a one-degree-of-freedom copter was derived and linearized. The controller gains for the methods of Linear Quadratic Regulator (LQR) and state feedback controller by pole placement were calculated and tested through the simulations with a unit step input. Performances were evaluated using the Integral of Absolute Error (IAE) index, and LQR achieved superior results compared to pole placement. Furthermore, a feedback linearization (FL) controller based on the nonlinear model was designed and compared with LQR under sinusoidal input in the presence of nearly square-wave-like disturbances. The results with respect to the IAE index demonstrated that the FL controller offered better tracking and robustness, highlighting the advantage of incorporating the nonlinear effects in the controller design. The proposed controllers were implemented and validated on Acrome One-DOF copter, a real-time experimental setup platform using a myRIO-based control system.

22 April 2026 in The International Journal of Advanced Manufacturing Technology
Verified
Journal Article
Open access
PDF file
NANurettin Gökhan Adar
Nurettin Gökhan Adar
AYAli Yildiz
Ali Yildiz
Precise and reliable seam tracking is essential for ensuring weld quality and productivity in robotic welding, especially under challenging conditions such as spatter, smoke, and arc glare. This study presents a seam tracking sensor that combines an adaptive refinement algorithm with fixed-geometry laser triangulation to achieve high-precision weld groove detection on matte surfaces (Ra ≈ 12.5 µm). The adaptive refinement algorithm effectively suppresses distortions caused by welding noise, while the fixed-geometry triangulation framework computes three-dimensional weld coordinates (X, Y, Z) using pre-defined, invariant hardware parameters, without requiring any online or runtime parameter re-adjustment, A Douglas–Peucker-based weld point extraction method, applied for the first time in seam tracking, was optimized for V-groove geometries. Real-time experiments using a Cartesian robotic platform demonstrated mean tracking errors of 0.10–0.18 mm in Y and 0.13–0.22 mm in Z across six workpiece orientations, with 95–98% of points within ± 0.2 mm of the reference trajectory across all tested orientations. The system achieved an average processing latency of 12.7 ms, enabling integration into high-speed welding operations. These results demonstrate the proposed sensor’s robustness to welding-induced disturbances and its potential to enhance seam tracking accuracy in robotic welding applications under realistic operating conditions.