Hyungi Kang

Mr. Hyungi Kang

Department of Electrical Engineering, Gachon University, Seongnam-si, Republic of Korea
orcid

Research Focus & Metrics

Academic Career Length

1Year (2026-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 July 2026 in Preprints.org
Verified
Preprint
Open access
PDF file
Hyungi KangHyungi Kang
Hyungi Kang
KKKyung Hwan Kim
Kyung Hwan Kim
JHJeongsoo Hong
Jeongsoo Hong
In this study, Mo/β-Ga₂O₃ vertical Schottky barrier diodes (SBDs) were fabricated using a sputtering process, and the electrical characteristics were evaluated as a function of post-annealing temperature. β-Ga₂O₃ is an ultra-wide bandgap semiconductor (UWBG) with a bandgap of about 4.8 eV and a critical breakdown field of 8 MV/cm, a promising material for high-voltage power switching applications. Mo (molybdenum) has a higher work function (~4.95 eV) than the electron affinity (~4.0 eV) of β-Ga₂O₃, its melting point (2623°C) is higher than Pt (1768°C) and Ni (1455°C), so it has excellent thermal stability, and it is selected as Schottky metal. The device is a structure in which a Si-doped β-Ga₂O ₃ epitaxial layer (10μm, Nd–Na = 2.2 × 1016cm ⁻³) is grown on an Sn-doped β-Ga₂O ₃ substrate (415μm, Nd–Na = 4.5 × 10¹⁸ cm ⁻³). The Ti/Au (10/40 nm) was used for back ohmic junction and Mo (300 nm) was used for front Schottky junction. Post-annealing treatment was performed at 400, 500, and 550°C using a rapid-thermal annealing process (RTA) in an Ar gas atmosphere, and in this process, Schottky junction and ohmic junction were formed simultaneously. Electrical characteristics including current-voltage(I-V), capacitance-voltage(C-V), Schottky barrier height (SBH), ideality factor (n), turn-on voltage (Von), on-resistance (Ron), on/off ratio, and breakdown voltage (BV) were evaluated. No obvious Schottky characteristics were observed before post-annealing treatment, which means that As-deposited Mo does not form a rectifying junction on the β-Ga₂O₃ without post-annealing treatment. After post-annealing treatment, the I–V curve of the Schottky rectification characteristics could be confirmed under all three conditions. Among the three conditions, the device annealed at 500°C exhibits best performance, with SBH of 0.96 eV, n of 1.01, Von of 0.72 V, Ron of 13.8 mΩ·cm², an on/off ratio of 10⁹, a breakdown voltage of -474 V, and a PFOM of 16.3MW/cm2. As a result of temperature-dependent I–V measurement, as chuck temperature increased, the reverse leakage current increased and SBH decreased in all devices, which is consistent with the thermally activated carrier transport. These results demonstrate that the Mo/β-Ga₂O₃ SBDs are a thermally stable contact for power device applications.

4 September 2026 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Hyungi KangHyungi Kang
Hyungi Kang
KKKyung Hwan Kim
Kyung Hwan Kim
JHJeongsoo Hong
Jeongsoo Hong
In this study, Mo/β-Ga2O3 vertical Schottky barrier diodes (SBDs) were fabricated using a sputtering process, and the electrical characteristics were evaluated as a function of post-annealing temperature. β-Ga2O3 is an ultra-wide bandgap semiconductor (UWBG) with a bandgap of about 4.8 eV and a critical breakdown field of 8 MV/cm, a promising material for high-voltage power switching applications. Mo (molybdenum) has a higher work function (~4.95 eV) than the electron affinity (~4.0 eV) of β-Ga2O3, its melting point (2623 °C) is higher than Pt (1768 °C) and Ni (1455 °C), so it has excellent thermal stability, and it is selected as a Schottky metal. The device is a structure in which a Si-doped β-Ga2O3 epitaxial layer (10 μm, Nd-Na = 2.2 × 1016 cm−3) is grown on an Sn-doped β-Ga2O3 substrate (415 μm, Nd-Na = 4.5 × 1018 cm−3). The Ti/Au (10/40 nm) was used for the back ohmic junction and Mo (300 nm) was used for the front Schottky junction. Post-annealing treatment was performed at 400, 500, and 550 °C using a rapid thermal annealing process (RTA) in an Ar gas atmosphere, and in this process, the Schottky junction and ohmic junction were formed simultaneously. Electrical characteristics including current-voltage (I–V), capacitance-voltage (C–V), Schottky barrier height (SBH), ideality factor (n), turn-on voltage (Von), on-resistance (Ron), on/off ratio, and breakdown voltage (BV) were evaluated. No obvious Schottky characteristics were observed before post-annealing treatment, which means that As-deposited Mo does not form a rectifying junction on the β-Ga2O3 without post-annealing treatment. After post-annealing treatment, the I–V curve of the Schottky rectification characteristics could be confirmed under all three conditions. Among the three conditions, the device annealed at 500 °C exhibits best performance, with an SBH of 0.96 eV, n of 1.01, Von of 0.72 V, Ron of 13.8 mΩ·cm2, an on/off ratio of 109, a breakdown voltage of −474 V, and a PFOM of 16.3 MW/cm2. As a result of temperature-dependent I–V measurement, as chuck temperature increased, the reverse leakage current increased and SBH decreased in all devices, which is consistent with the thermally activated carrier transport. These results demonstrate that the Mo/β-Ga2O3 SBDs are a thermally stable contact for power device applications.