Under the influence of homogeneous, rotating magnetic fields, superparamagnetic beads can be assembled into one- and two-dimensional superstructures on demand and used as dynamic components in microfluidic systems for colloidal separation. In this paper, the influence of the magnetic field strength and the rotation frequency on the device efficiency is studied. The optimum region is found to be between 100 and 200 rpm for a magnetic field strength of 330 Oe, while the highest value for separated mass per time (28 pg s⁻¹) is achieved for a flow velocity of 370 μm s⁻¹ at a magnetic field strength of 690 Oe. Furthermore, the employment of superparamagnetic beads as a continuous-flow bioseparation device is shown in a proof-of-principle study.

Lab-on-a-chip immuno assays utilizing superparamagnetic beads as labels suffer from the fact that the majority of beads pass the sensing area without contacting the sensor surface. Different solutions, employing magnetic forces, ultrasonic standing waves, or hydrodynamic effects have been found over the past decades. The first category uses magnetic forces, created by on-chip conducting lines to attract beads towards the sensor surface. Modifications of the magnetic landscape allow for additional transport and separation of different bead species. The hydrodynamic approach uses changes in the channel geometry to enhance the capture volume. In acoustofluidics, ultrasonic standing waves force µm-sized particles onto a surface through radiation forces. As these approaches have their disadvantages, a new sensor concept that circumvents these problems is suggested. This concept is based on the granular giant magnetoresistance (GMR) effect that can be found in gels containing magnetic nanoparticles. The proposed design could be realized in the shape of paper-based test strips printed with gel-based GMR sensors.