The steel industry is one of the largest industrial emitters of carbon dioxide, and new production routes are required to meet climate targets. Hydrogen-based direct reduction combined with an electric arc furnace is widely discussed as a promising pathway to significantly reduce emissions. This study investigates this production pathway with a mix of 87% scrap and 13% reduced iron. The system requires 3.40 GJ/t Steel , with hydrogen production and scrap melting as the main energy consumers. Exergy results show efficiencies of 53.6% for the electrolyzer, 74.8% for the reduction furnace, and 87.2% for the arc furnace, leading to an overall resource efficiency of 78.1%, more than twice that of the conventional blast furnace–basic oxygen furnace route. Emissions are 128 kg CO 2 e /t Steel with the Portuguese grid mix and 70 kg CO 2 e /t Steel with 100% renewables, corresponding to >94% reduction compared to conventional production. The results confirm the potential of hydrogen-based steelmaking for low-carbon steel production, while highlighting electrolyzer efficiency and renewable electricity availability as the main challenges. Further improvements through heat integration and by-product valorization could support both efficiency and sustainability
Steel production contributes significantly to global emissions, making its decarbonization essential. Electrified steelmaking based on electric arc furnaces (EAF) using hydrogen-based direct reduced iron (H2-DRI) and scrap is a promising pathway. This study analyzes how the H2-DRI:scrap ratio affects electricity demand, CO2 emissions, slag formation, and oxygen management. To address limitations of approaches based on aggregated data and linear scaling assumptions, a detailed bottom-up mass and energy balance model is developed, explicitly resolving process interactions between electrolysis, direct reduction, and EAF steelmaking. Eight H2-DRI:scrap ratios ranging from 0:100 to 100:0 are evaluated. Electricity demand increases from 1.1 GJ/tSteel (0.31 MWh/tSteel) for scrap-based operation to 13.9 GJ/tSteel (3.86 MWh/tSteel) for fully H2-based production, largely driven by hydrogen generation. Consequently, emissions strongly depend on electricity carbon intensity, with reductions of up to 95% under renewable supply. Electrolytic oxygen can fully cover process demand at ~10–13% H2-DRI, enabling system integration benefits. A sensitivity analysis evaluates the influence of key process parameters on electricity demand, CO2 emissions, and oxygen management, demonstrating the robustness of the proposed modelling approach.
Steel production contributes significantly to global emissions, making its decarbonization essential. Electrified steelmaking based on electric arc furnaces (EAF) using hydrogen-based direct reduced iron (H₂-DRI) and scrap is a promising pathway. This study analyzes how the H₂-DRI:scrap ratio affects electricity demand, CO₂ emissions, slag formation, and oxygen management. To address limitations of approaches based on aggregated data and linear scaling assumptions, a detailed bottom-up mass and energy balance model is developed, explicitly resolving process interactions between electrolysis, direct reduction, and EAF steelmaking. Eight H₂-DRI:scrap ratios ranging from 0:100 to 100:0 are evaluated. Electricity demand increases from 1.1 GJ/tSteel (0.31 MWh/tSteel) for scrap-based operation to 13.9 GJ/tSteel (3.86 MWh/tSteel) for fully H₂-based production, largely driven by hydrogen generation. Consequently, emissions strongly depend on electricity carbon intensity, with reductions of up to 95% under renewable supply. Electrolytic oxygen can fully cover process demand at ~10–13% H₂-DRI, enabling system integration benefits.